RogerD Posted December 31, 2011 Posted December 31, 2011 May have outsmarted myself here. Just finished a resto on another 74 DT360A. Sold it on ebay last week ($3200) Had it running like new but noticed a slight leak around the shift shaft and decided to replace the seal. After replacing the seal, I had trouble getting the circlip in the slot - no clearance - had to pull on the shaft to expose the slot? When re-installing the shift lever, I had to tap on it to get it on the shaft. When i started it for a test ride, the shifter would not engage. I pulled the shaft out about 1/2" and was able to shift into first, but it won't upshift into any other gear. It was getting dark, so I rolled it in for the night. Any thoughts? Did I do something tapping on the shifter shaft?
RogerD Posted January 1, 2012 Author Posted January 1, 2012 If anyone else has this problem, look at the thread in the workshop section. It might help someone. - Roger
Recommended Posts