Kelum Posted December 7, 2011 Share Posted December 7, 2011 Hi guys, I should adjust tappet screws on front of front cylinder and rear of rear cylinder as there is an oil leak at both ends. Could be an issue with O-rings there. I think the fitting socket for bolts would be 22mm? I feel like the frame is blocking the adjustment as they seem to be hard for a tool to reach? Can someone tell me the O-ring sizes I should buy and the precautions I should take? Thank you! Link to comment Share on other sites More sharing options...
Paulwhite Posted December 7, 2011 Share Posted December 7, 2011 there going to be stiff. your best bet would be to see if you can undo them 1st. i tried taking mine off a while ago.......ended up braking 3 spanners then rounded it off. Link to comment Share on other sites More sharing options...
Kelum Posted December 7, 2011 Author Share Posted December 7, 2011 there going to be stiff. your best bet would be to see if you can undo them 1st. i tried taking mine off a while ago.......ended up braking 3 spanners then rounded it off. OMG! So you rounded them up, how the hell would you ever adjust them when things go wrong? Will see if its possible.. Link to comment Share on other sites More sharing options...
Recommended Posts