2 Wheels Posted November 16, 2011 Author Share Posted November 16, 2011 Had a closer look at the forks this-morning in day light before work,,,,, and discovered that yes there is a circlip holding the stanchion in. It was hidden under a rusty washer,,,,,,,,,,so happy days. Link to comment Share on other sites More sharing options...
2 Wheels Posted November 18, 2011 Author Share Posted November 18, 2011 Lastnight, both brake caipers got a doin,,,,,,,stripped,,cleaned,,over-hauled. There now back togeather and work propperly,, i'll have to dismantle them again though so i can paint them up ! Tonight, the bars got cleaned,,,,this isn't shiney chrome,,,they are stripped back to bare metal ! Link to comment Share on other sites More sharing options...
Moderator Airhead Posted November 18, 2011 Moderator Share Posted November 18, 2011 wheres all that rust gone, them stancheons have come up well, you conna drop a bit of oil in the forks just to keep them lubed? Link to comment Share on other sites More sharing options...
2 Wheels Posted November 18, 2011 Author Share Posted November 18, 2011 you conna drop a bit of oil in the forks just to keep them lubed? I still have to pop out the circlip's so i can get into the lower leg's and free them up. Link to comment Share on other sites More sharing options...
Moderator drewpy Posted November 18, 2011 Moderator Share Posted November 18, 2011 fork in hell, good job so far Pat. Link to comment Share on other sites More sharing options...
wild foamy Posted November 19, 2011 Share Posted November 19, 2011 This thread is relevant to my interests good job bud, you'll have that finished before ive even started putting my XJ back together! Link to comment Share on other sites More sharing options...
2 Wheels Posted November 20, 2011 Author Share Posted November 20, 2011 Got some paint the weekend,,,,,,,, ZG-90,,,, its got Zinc mixed in with it,,,,,,,hence me stripping everything back to bare metal. Colours of choice are,,,,,Black,,Red,,Gray(bright) I was told a long time ago never to paint cold steel,,, so all bits will be slightly warmed up with a heat gun. Paint can will then be taken out of a jug of hot water,,,,,,,,, spray like a mad thing is the name of the game then ! Bar clamps cleaned up Mini Bike's plastics will be getting the chop too,,,, she will be more naket,,,, they are all cracked an broken anyway Link to comment Share on other sites More sharing options...
2 Wheels Posted November 20, 2011 Author Share Posted November 20, 2011 Bar clamps are the first things to get a lick of paint Thats all i done the weekend,,,,,, i was busy clocking up some miles on me DT,,,,, she needed a good spin ta blow of the cobwebs Link to comment Share on other sites More sharing options...
Moderator Airhead Posted November 20, 2011 Moderator Share Posted November 20, 2011 ............ I was told a long time ago never to paint cold steel,,, so all bits will be slightly warmed up with a heat gun. Paint can will then be taken out of a jug of hot water........... Ooh be careful how hot Pat, i've heard that the concave end of the can can suddenly become a convex end with that method, make it warm water perhaps? Link to comment Share on other sites More sharing options...
2 Wheels Posted November 20, 2011 Author Share Posted November 20, 2011 Ooh be careful how hot Pat, i've heard that the concave end of the can can suddenly become a convex end with that method, make it warm water perhaps? Noted, OG Warm water it is then,,,,Ta Link to comment Share on other sites More sharing options...
2 Wheels Posted November 24, 2011 Author Share Posted November 24, 2011 Well, am still workin on her ! Am doing all the boring bits,,,,,,,, like cleaning small bits that youll hardly ever see Things like this Also sprayed the calipers Link to comment Share on other sites More sharing options...
2 Wheels Posted November 24, 2011 Author Share Posted November 24, 2011 Finally got the lower legs seperated from the stanchions. This was a real pain in the ass,,,,, the forks are so small,,,,,it made it really hard to get the circlips out. (no little holes in them to put in propper circlip pullers) Any screw-driver that would fit inbetween the stanchion and leg wasnt strong enough to pop out the circlip as it would just bend. Finally after some cunning bending and shaping on a nail,,,,,i got them out,,,thank goodness. Im nearly finished cleaning them up ! Link to comment Share on other sites More sharing options...
Moderator Airhead Posted November 24, 2011 Moderator Share Posted November 24, 2011 nice one Pat, are the fork sliders alloy? Link to comment Share on other sites More sharing options...
2 Wheels Posted November 24, 2011 Author Share Posted November 24, 2011 Ok,,so i cheated on this bit,,,,,,,,,Mini Bike is getting new bake leavers. Because of the type of calipers on the bike, they will need a good pull in order for them to work effectivaly. The old leavers would not be up to the task cause they were well fooked. These new leavers are very strong and are adjustable,,,,,, for a kids fingers to reach them propperly they can be moved closer or further away from the bars. Link to comment Share on other sites More sharing options...
Moderator Airhead Posted November 24, 2011 Moderator Share Posted November 24, 2011 yeah...mountain bike levers Link to comment Share on other sites More sharing options...
2 Wheels Posted November 24, 2011 Author Share Posted November 24, 2011 nice one Pat, are the fork sliders alloy? I think so Paul,,,,,,,there made of something shiney anyway !! Link to comment Share on other sites More sharing options...
blackhat250 Posted November 25, 2011 Share Posted November 25, 2011 Keeping you busy pat,,, , hope you got log shed full, thats the cold weather here, f*kn freezin here today,,, Link to comment Share on other sites More sharing options...
2 Wheels Posted November 25, 2011 Author Share Posted November 25, 2011 Keeping you busy pat,,, , hope you got log shed full, thats the cold weather here, f*kn freezin here today,,, Aye Blackie,,, heavy frost here one mornin during the week,,,back to rain now again,,,, but bloody ele its getting cold these nights as the wind starts to come from the North. Any update on your own wee project ? ya get electrics sorted. Link to comment Share on other sites More sharing options...
2 Wheels Posted November 28, 2011 Author Share Posted November 28, 2011 Well the internals of the forks are now sorted, cleaned and all oiled up,,,there's now a nice bounce in them. There back togeather now and have got there first layer of paint on the lowers. no pic yet as there drying. Alot of small parts were sprayed at the weekend to,,,,,, feel like im getting somewhere now. Saturday, i called over to me mate to see how he was getting on with sand-blasting,,,,,,,, they werent even moved from where i left them on his bench. ( dissappointed i was). I guess im last on the list of things to do seeing as its just a favor. Anyway he said he'll get cracking on them soon. Naa boather says I. BUT as i was heading i grabbed the swing-arm,,, i'll do this bit myself i said,,,,,,should be easy enough. So on sunday,,,,with me running out of things to be gettin on with,,,, I took to giving her a clean. Here she is,,,,, pic's arent great i know but they are all cleaned back to bare metal. Link to comment Share on other sites More sharing options...
Moderator Airhead Posted November 28, 2011 Moderator Share Posted November 28, 2011 nice Pat what did you use to clean it with? Link to comment Share on other sites More sharing options...
Recommended Posts