Geoclinton Posted October 16, 2011 Posted October 16, 2011 Hi All I have just taken off the swinging arm to replace the bushes (mot Failure) where can I get them ? I need the bush that ties the arm with the mono shock. Any ideas? Cheers Geo
Moderator Airhead Posted October 16, 2011 Moderator Posted October 16, 2011 so not the two plastic bushes the arm pivots on then ?
NEV Posted October 16, 2011 Posted October 16, 2011 This should give a better idea of what you need Geo http://images.cmsnl....760d-4_3bdf.gif http://www.cmsnl.com/yamaha-dt175g-dual-purpose-1980_model8733/partslist/D-04.html
Geoclinton Posted October 16, 2011 Author Posted October 16, 2011 I don;t think so its the bush from the suspension arm fixing on to the swinging arm frame.
NEV Posted October 16, 2011 Posted October 16, 2011 Here? http://images.cmsnl.com/img/partslists/rear-shocks-dt175g-dual-purpose-1980_bigyau0760d-6_6365.gif http://www.cmsnl.com/yamaha-dt175g-dual-purpose-1980_model8733/partslist/D-06.html
Moderator Airhead Posted October 16, 2011 Moderator Posted October 16, 2011 you need to take care here, I think the early one is wider than the later one
Geoclinton Posted October 16, 2011 Author Posted October 16, 2011 Yep its there Number 9" lower bushing" Nice parts site. Any idea where I could get the bush though?
NEV Posted October 16, 2011 Posted October 16, 2011 Yep its there Number 9" lower bushing" Nice parts site. Any idea where I could get the bush though? Them Geo cmsnl.com
NEV Posted October 16, 2011 Posted October 16, 2011 Them Geo cmsnl.com The good thing about them is, that when you click on part link, it shows other compatable bikes for same part, on top rightt of page.
Moderator Airhead Posted October 16, 2011 Moderator Posted October 16, 2011 there are part manual in the workshop forum, it would benefit you you to use them Geo
Geoclinton Posted October 16, 2011 Author Posted October 16, 2011 Cheers chaps They haven't got he part but they certainly are comprehensive. II have trawled through yam bits and wemoto no joy should I try a bush manufacture company?
Geoclinton Posted October 16, 2011 Author Posted October 16, 2011 Oh and is there a difference between a H model and a Mx ?
Moderator Airhead Posted October 16, 2011 Moderator Posted October 16, 2011 phone yambits tommorow, see if they are obsolete
PICTURE_MAN36 Posted October 16, 2011 Posted October 16, 2011 If Yambits or Yuniparts don't have them try your local Yamaha Dealer. I am restoring a DT125MX and you will be surprised how many bits are still available.
Geoclinton Posted October 21, 2011 Author Posted October 21, 2011 Yamaha hunted 1 down so will be fitting tomorrow that s 1 more thing sorted Thanks again Geo
Recommended Posts