Pete of Kettering Posted September 1, 2011 Posted September 1, 2011 Hi, I am new to this forum and posted this somewhere else but this seems to be the place, hope so . I am restoring a 78 dt 175 mx it cost £370 and was basicly sound underneath all the oily mud My problem is the cdi unit was in the place that the tool kit should b, so i don't know where it should be, i can't see any obvious brackets. If anyone could tell me where the cdi unit goes i would be most greatfull!!! Thanks Pete.
Moderator Airhead Posted September 1, 2011 Moderator Posted September 1, 2011 Right hand side of the bike behind the side panel pete, it has a rubber strap which slides on a bracket attached to the inner plastic mudguard. Have a look at the picture in this ebay link and see the grey (zinc plate) bracket at the top left of the picture http://www.ebay.co.uk/itm/Yamaha-DT175MX-inner-mudguard-/300593714269?pt=UK_Motorcycle_Parts&hash=item45fcc8145d
Pete of Kettering Posted September 1, 2011 Author Posted September 1, 2011 And trere was me thinking there was nowhere for it to go because there are no brackets for it on the frame..it never occured to me that it would go on the inner mudguard that isn't on the bike yet. Problem solved..Thanks a lot.
Recommended Posts