busyeddie Posted August 27, 2011 Share Posted August 27, 2011 Rebuilding the engine on my dt, delved into my big box of spares and the barrel I had had different sized reeds in it to the one on the bike. And the inlet rubbers are only compatible with the larger reeds as they have a section of rubber that pretrudes into the reed block. The block is taller, wider, and deeper. The opening. Between the carb and reeds is also a different size, hence why the rubbers are not compatible. Which is standard? Could it be from a different year or a 125? And if the ones im using are not standard, in guessing ill need a bigger jet? Link to comment Share on other sites More sharing options...
Moderator Airhead Posted August 27, 2011 Moderator Share Posted August 27, 2011 This is mine Link to comment Share on other sites More sharing options...
busyeddie Posted August 27, 2011 Author Share Posted August 27, 2011 Thats what I have I think. But that will only work with the larger set of reeds. What on earth is the smaller reed block doing attached to a 175 barrell is what I want to know!! Link to comment Share on other sites More sharing options...
Moderator Airhead Posted August 28, 2011 Moderator Share Posted August 28, 2011 Thats what I have I think. But that will only work with the larger set of reeds. What on earth is the smaller reed block doing attached to a 175 barrell is what I want to know!! Cant help you with that one ! Link to comment Share on other sites More sharing options...
Recommended Posts