von_sieben Posted August 19, 2011 Share Posted August 19, 2011 Hello, i was wondering if any of you guys know wether the exhaust of a DT 125 AT1 1973 can be used on a DT 125 E 1977? i have no chance to see one in person so i can´t check wether the connection to the cylinder are the same. thanks a lot michael Link to comment Share on other sites More sharing options...
chrisp Posted August 19, 2011 Share Posted August 19, 2011 I think not. The early at/ct/dt models had exhausts which emerge to the right hand side of the bike, while the later models have pipes which go under the seat and come out on the left hand side...i could be wrong, but search google images to be sure. Chris. Link to comment Share on other sites More sharing options...
von_sieben Posted August 19, 2011 Author Share Posted August 19, 2011 I think not. The early at/ct/dt models had exhausts which emerge to the right hand side of the bike, while the later models have pipes which go under the seat and come out on the left hand side...i could be wrong, but search google images to be sure. Chris. this i know, and my 2 DT 125E both have right hand pipes as the AT1. what i don´t know, and can´t find an image that shows it clear, is if the pipe bolts on to the cylinder in the same way. everything else can be done, i´m quite sure. sorry for my poor english, hope i can make myself understandable.. Link to comment Share on other sites More sharing options...
Recommended Posts