Noise Posted November 28, 2011 Author Share Posted November 28, 2011 Well as promised here are my nice new shiney carbs, not gunna do any thing to them as there are in fantastic condition and i see no point in stripping them down due to them only doing 1500 miles. Just purchasedc a 280 piece stainless steel nut and bolt kit off of E-bay for £8.85 to replace all of the bolts on the frame once they arrive i will stick all the old bolts back in and ship it out to powder coat. Link to comment Share on other sites More sharing options...
Noise Posted December 5, 2011 Author Share Posted December 5, 2011 After another week end in the shed that horrid god awfal white paint has now been given the finger and i can gladly say it will never be seen again! took me the whole on Saturday to do as i had to be 100.000% sure that the Nitromorse was removed and that all the flakey paint was gone. I then started the swing arm on Sunday but as it always happens to me i run out of paint! So gotta buy some more and finish that off. I have also made a nice Ally plate which will be Gloss black to cover up the mono shock as now i have the sprung seat you can see all of the battery and wires etc. Onto the Pics!!! This is the size of my new foot pegs (old ones on the left new on the right) NITROMORSE!!!!! Onto paint, This is the ally cover Link to comment Share on other sites More sharing options...
Noise Posted December 6, 2011 Author Share Posted December 6, 2011 Done a slight bit of shaping to the plate that will cover my mono shock. Next thing for this will be to etch prime it and paint it gloss black, then i will get some nice stainless steel P clips to fit it. Link to comment Share on other sites More sharing options...
Noise Posted December 10, 2011 Author Share Posted December 10, 2011 Well she's finally coming together, engine is now in, the carbs and fuel pump is on, coil packs on, swing arm and mono shock in, mono shock cover is in place and looking pretty with the S/S P clips, every single nut bolt and washer is now stainless steel and copper greesed up, and lastly the wireing loom is on. Tomorrow i will have the air filter on and may even have the forks and front n rear wheel in. Link to comment Share on other sites More sharing options...
Noise Posted December 11, 2011 Author Share Posted December 11, 2011 She's coming together really nicely now! as you can see that she's looking more like a motorsickle now and im so glad that the gold on the headers looks quite smart! Now all thats left to do is: Seat brakets New rear fender Handle bars + controls Move starter button side pannels and cubby holes Battery box Front brake calliper Foot rests and controls Re-paint fuel tank. Put petrol in her Tax + insure Start her up and ride away happy! Link to comment Share on other sites More sharing options...
Noise Posted December 15, 2011 Author Share Posted December 15, 2011 Just found a picture of her on the day i picked her up! Out with the tool box n off with all them horrid optional extras! She had the following bolted on: Fog lights with an old bit of metal used as a fog light bar which was drilled into the yoke! Engine crash bars with criuse foot pegs Rider and pillion floor boards Saddle bag bars Sissy bar and rack. Took me a whole day to remove all this crap and i had to drill out a good hand full of bolts alond the way! Link to comment Share on other sites More sharing options...
funkymunkydavid Posted December 30, 2011 Share Posted December 30, 2011 what a transformation so far! all the blood,sweat and tears is gonna be worth it! cracking work fella Link to comment Share on other sites More sharing options...
Moderator drewpy Posted December 30, 2011 Moderator Share Posted December 30, 2011 looking good fella Link to comment Share on other sites More sharing options...
up.yours Posted December 31, 2011 Share Posted December 31, 2011 im realy curious as to how much of the old tack your going to replace. as it's looking real good up to now. Link to comment Share on other sites More sharing options...
Noise Posted January 4, 2012 Author Share Posted January 4, 2012 Well here we go into 2012! and im sorry to say but not much happened to the bike over the Christmas holidays........too much whiskey lol Thanks for the comments they are always nice to receive in responce "up yours" i am keeping as little of the old tat off as possible and only sticking the "MOT requirements" back on. Well here are some piccies. Foot rests are now finished and on the bike. And i have now finished the fuel tank, put cubby hole back in with the battery and fuses followed by the hand controls ready for the handle bars to go on (very last job i will do) tank stripped Primed Finished Plummed in Cable cover LOOKIN GOOD!!! This week end im hoping to have the exhausts done and the seat brackets and fender stays finished and on the bike Link to comment Share on other sites More sharing options...
realrayzor Posted January 5, 2012 Share Posted January 5, 2012 Top job noise, top job. wont be long and u'll be Link to comment Share on other sites More sharing options...
Toutsuite Posted January 5, 2012 Share Posted January 5, 2012 Lookin' real good Keith! Can't wait to see her complete! Link to comment Share on other sites More sharing options...
Noise Posted January 6, 2012 Author Share Posted January 6, 2012 Cheers guys! well i still got a few bits left to do like: 1) Exhausts......shorten them and wrap them 2) A few seat brackets to fit that back on. 3) Re-do the fender stays (ive started but lost interest due to a bottle of JD ) 4) Fit my new shiney number plate bracket i got from customewizard.com (HIGHLY RECOMENDED SITE!) 5) Strip and paint the last side cover (found it in the bottom of a box D'OH!!!! 6) Fit handle bars, hand controls and head light. 7) Oil change + more petrol + starter buttom = Me happy --------------------------------------------------------- 8) Fix Horn So a few bits to keep me busy till the end of the month but at least it keeps me out of trouble. I took the HT leads out the other day and turned her over to see if i had wired up the starter motor up right and the the cable i used was good enough and im glad to say its great! the only thing i found tho was that the horn dont work.......mainly because the two wires that go into the horn are the only two i didn't mark up so im 99% sure i got them in the wrong way lol O well theres another thing on the "to do" list. More pics to follow as the build progresses Link to comment Share on other sites More sharing options...
Noise Posted January 14, 2012 Author Share Posted January 14, 2012 (edited) Hey guys heres a quick update on the old progress and i have to say.......im well chuffed so far. Im hoping this video will work if not i will have to learn how to put it onto Youtube. I put the handle bars one temperarily as they will have to come off again to get her out the shed, ive put the handle bar grips on that have the indecators built into them, pulled out the choke put her on resurve and push the button and she turns over and few times and aways she goes!!!! <iframe width="560" height="315" src="http://www.youtube.c...bed/OmSh5G033sI" frameborder="0" allowfullscreen></iframe> http://www.youtube.com/embed/OmSh5G033sI Sorry about the camara-manship its a small shed and trying to show the bike off with one hand was a wee bit difficult lol Just been out side today and sorted out the tick over and she runs like a beauty!! Still gotta do the seat brakets, front brake, head light and my number plate light. Then shes on the road! I cant wait any longer Edited January 15, 2012 by Airhead Link to comment Share on other sites More sharing options...
up.yours Posted January 15, 2012 Share Posted January 15, 2012 im liking it lots keith, as for the camera work ,take your time , slow is the name of the game, so we can take a good look at it. looks great in matt black i must admit. Link to comment Share on other sites More sharing options...
Noise Posted January 15, 2012 Author Share Posted January 15, 2012 Yer I thought my camara manship was a bit shit as I only had just over a minute of recording time left, so once ive got her out the shed I will do a better vid of her n walk around her better. Im well happy with the Matt black, I got it off amazon, called cobra big black, 600ml can and you can get two cans for £15 BARGIN compared to halfruads one 500ml can for £15! Link to comment Share on other sites More sharing options...
Noise Posted January 23, 2012 Author Share Posted January 23, 2012 Hey guys and gals, Well we are nearly there! only a few more bits to finish off and then she comes out the shed ready for a good old ride out. Ive wired up the number plate light which ive threaded through the swing arm so just gotta get a rubber gromit to stop the water getting into the swing arm, Ive put my bar end wing mirror onto the normal mounting point for wing mirrors (dont look too bad i think) and i have finished the front seat brackets so just need to do the rear brackets and paint them and re fit them with the seat. So once she is out the shed and i have more room i will bleed the brakes and top up the fuel and thats job jobbed!!! heres a few more pics for ya to look through. Handle bars now on, Front seat brackets done and ready for paint Bar end mirror mounted in the "right" place A quick side shot, i will be getting my mate to spin me up some exhaust tips when i take it to work, thinking a nice copper or brass tip will look nice? Link to comment Share on other sites More sharing options...
Moderator drewpy Posted January 23, 2012 Moderator Share Posted January 23, 2012 looknig good, brass would be the one to go for. Link to comment Share on other sites More sharing options...
up.yours Posted January 23, 2012 Share Posted January 23, 2012 looks brill , BUT , theirs always going to be a but, and on this occasion it's that brake fluid casing , it needs a rub down , and either chroming or matt blacking. as it's bubbling. Link to comment Share on other sites More sharing options...
daveye Posted January 24, 2012 Share Posted January 24, 2012 WOW its lookin awesome man am so jealous heh...i've not been on here for a while as ive been pissed off with maself at failing my mod 1test recently..still awaiting another date at this time..anyway deffo great job on the bike...where did you get the bars for it i fancy a set for my wee sr as it looks like am gonna be on it for some time yet and fancy a change. cheers Dave Link to comment Share on other sites More sharing options...
Recommended Posts