Rob82 Posted June 22, 2011 Share Posted June 22, 2011 Having an absolute nightmare trying to rebuild my R6 , bought it a month ago , to find later ro my displeasure that the previous owner had butchered several sections of wiring among other things , anyway onto the problem .... I have come to reconnect all the wiring , everything present and accounted for and all plugs attached , except one , i cannot find where abouts the 4 pin plug from the ignition switch fits , i have spent 2 days looking to see if i have missed anything and i just cant see anything , no plugs in the loom and cant see where it could possibly go , the bike will not turn over on the starter motor , not sure if it will run with a bump start , the bike started and ran before i stripped it down but there were wires twisted and taped together in several places as well as a few wires that were badly burned (and have now been replaced ) if anyone can tell me where this plug fits (or even better a picture of where) i would be extremely grateful Link to comment Share on other sites More sharing options...
Rob82 Posted June 22, 2011 Author Share Posted June 22, 2011 problem solved , the plug had been bypassed as the switch is faulty , the wiring connection that bypassed the switch had corroded and broken apart when i have benn moving wiring . Link to comment Share on other sites More sharing options...
Recommended Posts