col68 Posted June 21, 2011 Posted June 21, 2011 does anybody have or know where i can get a left n/s side panel from (the black plastic one that fits below the exhaust) for 1977 175 enduro
DTGordo Posted June 21, 2011 Posted June 21, 2011 Hi Col68, They don't seem to appear much on EBay so a wrecker might be your best bet? Gordo
nayruf Posted June 22, 2011 Posted June 22, 2011 Hi Col68 You could try () they have supplied me with some hard to get DT twinshock parts in the past,
chrisp Posted June 22, 2011 Posted June 22, 2011 If you widen your search on ebay to "worldwide" you will find loads, particularly in asia.
col68 Posted June 23, 2011 Author Posted June 23, 2011 have been down all above avenues still no luck
Moderator Airhead Posted June 23, 2011 Moderator Posted June 23, 2011 have been down all above avenues still no luck Darren it takes time mate, the bike is old and rare now. you have to search long and hard but ebey is no doubt your best bet. is it a 1G1 model? I will keep an eye out too
nayruf Posted June 24, 2011 Posted June 24, 2011 Darren it takes time mate, the bike is old and rare now. you have to search long and hard but ebey is no doubt your best bet. is it a 1G1 model? I will keep an eye out too Hi Col68 As a last roll of the dice you could take a plaster cast of another side panel from another DT, then you could use that cast as a die to make a fiberglass one using fast a fast glass kit, you will have to use some release compound so the finished fiberglass casting will come free from the mould, I have made some other plastic bits and bobs like this, I have done this before to make model boat hulls. (http://www.cstsales.com/tutorials/fiberglass_mold.pdf) Just found these!!! http://cgi.ebay.com/ebaymotors/LEFT-SIDE-COVER-1975-YAMAHA-DT175-_W0QQcmdZViewItemQQhashZitem1e63dbd997QQitemZ130524371351QQptZMotorcyclesQ5fPartsQ5fAccessories http://cgi.ebay.com/ebaymotors/NEW-Yamaha-DT100-DT175-Side-Cover-LR-_W0QQcmdZViewItemQQhashZitem415a086341QQitemZ280683373377QQptZMotorcyclesQ5fPartsQ5fAccessories http://cgi.ebay.com/ebaymotors/Yamaha-1974-76-DT175-Side-Cover-_W0QQcmdZViewItemQQhashZitem27b8718657QQitemZ170598172247QQptZMotorcyclesQ5fPartsQ5fAccessories
DTGordo Posted June 24, 2011 Posted June 24, 2011 That looks like an earlier side cover. I couldn't see the '77 175 on the parts listing I use but the 250 and 100 didn't match that as far as I could see. I have one from the '74 dt though so if it is the same I'm sure I could make a mould. Have you been able to find an image of the cover that you need? Gordo
chrisp Posted June 24, 2011 Posted June 24, 2011 does anybody have or know where i can get a left n/s side panel from (the black plastic one that fits below the exhaust) for 1977 175 enduro Is it the 1G1 twinshock model, or the MX monoshock model?
Moderator Cynic Posted June 24, 2011 Moderator Posted June 24, 2011 Is it the 1G1 twinshock model, or the MX monoshock model? Can't be the monoshock that has the exhaust behind the panel.
col68 Posted June 27, 2011 Author Posted June 27, 2011 ureka spoke to dave at redrose hes got one and is sending it today thanks to all
Recommended Posts