Toby1994 Posted June 18, 2011 Share Posted June 18, 2011 Hello, I was wondering if someone could help me. I have just recently put my bike back together and there are two pipes coming out of the head which pour out water when I top it up. There are also two pipes on the carburetor which I have no idea where they go. Could someone please tell me where they go? The bike starts and runs fine without them, but I am worried that the water isn't flowing. Thanks, Toby Here are some pictures. Link to comment Share on other sites More sharing options...
NEV Posted June 18, 2011 Share Posted June 18, 2011 Hello, I was wondering if someone could help me. I have just recently put my bike back together and there are two pipes coming out of the head which pour out water when I top it up. There are also two pipes on the carburetor which I have no idea where they go. Could someone please tell me where they go? The bike starts and runs fine without them, but I am worried that the water isn't flowing. Thanks, Toby Here are some pictures. Yer missing a couple of pipes fella, get yourself 2x 6mm I.D rubber hoses, each about 8" long, not sure exact length , (top of my head) In the bottom pic the spigot nearest the spark plug (top red arrow) unscrew the cross head hex bolt, and turn the spigot around 180degrees, so that the spigot is now facing upwards, then just connect the pipes up, one from the carb to the head, doesn't matter which way round. Hope this helps Link to comment Share on other sites More sharing options...
Toby1994 Posted June 18, 2011 Author Share Posted June 18, 2011 Thanks a lot =) Link to comment Share on other sites More sharing options...
Recommended Posts