Barking Mad Posted June 10, 2011 Posted June 10, 2011 Just building an SR250 Cafe here are some pics http://www.barkingmadspeedshop.com/2011/02/1980-sr-250-cafe-bike_21.html Just moving to the exhaust any ideas?
NEV Posted June 10, 2011 Posted June 10, 2011 Just building an SR250 Cafe here are some pics http://www.barkingmadspeedshop.com/2011/02/1980-sr-250-cafe-bike_21.html Just moving to the exhaust any ideas? Sweet mate, bet that hammer causes a bit of discomfort,mind is that the tool kit for it?
Moderator YamaHead Posted June 10, 2011 Moderator Posted June 10, 2011 I used to have 1 of those SR's....... great little bike! Yours is progressing nicely mate.
Barking Mad Posted June 10, 2011 Author Posted June 10, 2011 The hammer stopped the seat from flopping off backwards. I expect it will be a fun little bike. we toyed with a larger motor but was not sure the frame would take it. The frame has had all of the tabs etc removed, I weighed the frame and its 19 pounds the stock one that I have with all tabs still on is 27 pounds.
Barking Mad Posted June 13, 2011 Author Posted June 13, 2011 Soda blasted the motor today.. http://www.barkingmadspeedshop.com/2011/06/soda-blsating-motor-stage-1.html
Barking Mad Posted June 29, 2011 Author Posted June 29, 2011 Few updates! http://www.barkingmadspeedshop.com/2011/06/tank-is-stripped.html http://www.barkingmadspeedshop.com/2011/06/built-or-better-said-split-chopped.html http://www.barkingmadspeedshop.com/2011/06/first-batch-back-from-painters-and.html
Moderator drewpy Posted June 29, 2011 Moderator Posted June 29, 2011 Are you rusting the exhaust up? nice bit of work there BM
Barking Mad Posted July 6, 2011 Author Posted July 6, 2011 A few updates things will go quickly now.. http://www.barkingmadspeedshop.com/2011/07/its-alive-or-at-least-roller.html http://www.barkingmadspeedshop.com/2011/07/hubs-are-about-done.html
Barking Mad Posted July 6, 2011 Author Posted July 6, 2011 Ohhh shiney, I like shiney it looks good lots of work tho, Almost should have painted them just almost tho...
Barking Mad Posted July 7, 2011 Author Posted July 7, 2011 Motor is in! http://www.barkingmadspeedshop.com/2011/07/motor-is-in.html
Barking Mad Posted July 9, 2011 Author Posted July 9, 2011 Today... Rear wheel is laced up and ready to be trued Rear sets are bolted up Wiring is being put on and lengthened where needed One side cover is polished All of the shift assembly and brake assembly have been cleaned and polished up Picked up the tank Polished spoke nipples Painted some stuff Picked up a bunch of parts, heat shrink, connectors, replacement brake switches, another bunch of nuts and bolts and some other odds and ends...
Barking Mad Posted July 11, 2011 Author Posted July 11, 2011 Triples and speedo mounted! http://www.barkingmadspeedshop.com/2011/07/triples-spedo-and-headlight-mounted.html
Barking Mad Posted July 13, 2011 Author Posted July 13, 2011 Carb is on! http://www.barkingmadspeedshop.com/2011/07/carb-is-done.html
Barking Mad Posted July 17, 2011 Author Posted July 17, 2011 In the final stretch! http://www.barkingmadspeedshop.com/2011/07/down-to-final-bits.html
Moderator drewpy Posted July 17, 2011 Moderator Posted July 17, 2011 nedd to get some blur free pictures up my friend, hurting my eyes
Barking Mad Posted July 18, 2011 Author Posted July 18, 2011 Better all done! http://www.barkingmadspeedshop.com/2011/07/shes-all-good-to-go.html
Moderator drewpy Posted July 18, 2011 Moderator Posted July 18, 2011 Better all done! http://www.barkingmadspeedshop.com/2011/07/shes-all-good-to-go.html yea, now we want a cool video to see the bike in action my pequeno amigo
Recommended Posts