Canny lad Posted May 2, 2011 Share Posted May 2, 2011 Guys i wonder if you could help me ID which model RD these forks are off and also the master cylinder..check these pics out and see if you know as i cant order parts unless i know the right model... Link to comment Share on other sites More sharing options...
YPVS TONE Posted May 2, 2011 Share Posted May 2, 2011 The forks look like late model i.e 1980 RD200DX . Can you measure the diameter of the stanchions as pretty sure they were smaller diameter then the RD250 and RD400. Tony Link to comment Share on other sites More sharing options...
Canny lad Posted May 2, 2011 Author Share Posted May 2, 2011 upper forks are 30.2 mm and lower 39.25.. Link to comment Share on other sites More sharing options...
YPVS TONE Posted May 3, 2011 Share Posted May 3, 2011 If you prise out the rubber cap from the very top of the fork where it goes into the top yolk and find a large hexagon bolt I'm sure these are 1979/1980 RD125DX/RD200DX forks. Tony Link to comment Share on other sites More sharing options...
Canny lad Posted May 3, 2011 Author Share Posted May 3, 2011 thanks Tony i will take a peek.. ok theres no hex nut Tony only what looks like a core plug.. see attached [ic Link to comment Share on other sites More sharing options...
Recommended Posts