buckskin Posted April 20, 2011 Share Posted April 20, 2011 Hi all just purchased 1975 dt250,not running.After a lot of cleaning and late nights I have got it running,but will only idle for a few seconds.I cleaned the points and it ran better but still a lot spitting, backfiring.I plan on changing the points to see if that's the problem?Can't find any body that knows what size of flywheel puller I need ,or were I can get one? Any suggestions? Thanks Link to comment Share on other sites More sharing options...
nayruf Posted April 20, 2011 Share Posted April 20, 2011 Hi Buckskin Try this link, its a UK supplier, http://cgi.ebay.co.uk/YAMAHA-DT250-DT400-DT250MX-DT400MX-DT-FLYWHEEL-PULLER-/230606080567?pt=UK_Motorcycle_Parts&hash=item35b1318a37 hope this helps Link to comment Share on other sites More sharing options...
kishan Posted April 20, 2011 Share Posted April 20, 2011 welcome Link to comment Share on other sites More sharing options...
blackhat250 Posted April 20, 2011 Share Posted April 20, 2011 Welcome buckskn, I take it your in the USA. The condencer is another thing to replace, . & flywheel pullers are cheap, and available on Ebay.. Link to comment Share on other sites More sharing options...
Moderator drewpy Posted April 27, 2011 Moderator Share Posted April 27, 2011 to the forum Link to comment Share on other sites More sharing options...
Recommended Posts