mcbrien Posted April 13, 2011 Posted April 13, 2011 I am trying to find out if a Radian (86) top triple tree or the upper & lower as a unit will bolt up to an 86 SRX. If so will it retain same spacing for my front wheel? As you can probably figure out I want to install a standard handle bar and I don't want to drill holes in my stock triple tree to mount risers. Radian triple trees are available on ebay right now at reasonable prices. Unless someone on here has a Radian top triple they want to sell. Thanks,
Moderator drewpy Posted April 13, 2011 Moderator Posted April 13, 2011 MMM from the title, I thought it was a sex tape
mcbrien Posted April 14, 2011 Author Posted April 14, 2011 Well I got you to look I figure I will need a lot of views to get an answer to my question .
mcbrien Posted April 17, 2011 Author Posted April 17, 2011 Well I bought an entire triple tree assembly with risers off ebay for $40 bucks . So will see .
Moderator drewpy Posted April 17, 2011 Moderator Posted April 17, 2011 share your findings, that way, we can answer your question
mcbrien Posted April 24, 2011 Author Posted April 24, 2011 share your findings, that way, we can answer your question Not really , The fork diameter and spacing is right . The center stem is off so Radian top triple will not fit on SRX stem . The SRX stem is about an inch longer and completely different on top so I can't swap stems so the only option is to cut and lengthen Radian stem to fit SRX . I may try this since I work in a machine shop but I'm going to look into other options also. For now I'm putting it back together and enjoying the summer .
Recommended Posts