cakeboy Posted April 2, 2011 Share Posted April 2, 2011 i see that there selling oxygen sensors for the xvs 1300 midnight star on ebay [ to help running at low revs ] at about £13 from a greek bike shop. has anyone bought one of these and did it work ? Link to comment Share on other sites More sharing options...
jimm Posted April 2, 2011 Share Posted April 2, 2011 Haven't seen it but if it is what I assume it is, it's not an O2 sensor as such, its simply a small resistor that fools the EMS into making the mix a tad richer at row revs, thus smoothing it out. Fits between the stock O2 sensor and the EMS. Usually costs a little bit more, maybe 50, so make sure its not a crappy one!! Do they work? Yes. It was one of the first changes I made to mine. 5 min job to fit - if its good one, it'll have the correct plugs, etc. Google 'Jacks's O2 Mod' and read what you find:) Link to comment Share on other sites More sharing options...
cakeboy Posted April 6, 2011 Author Share Posted April 6, 2011 thanks jimm, were did you get your oxyen sensor ? because i would rather pay a bit more for a good one . cheers Link to comment Share on other sites More sharing options...
jimm Posted April 6, 2011 Share Posted April 6, 2011 thanks jimm, were did you get your oxyen sensor ? because i would rather pay a bit more for a good one . cheers I got mine from Alchemy Bikes, dunno if they still have them or not. Link to comment Share on other sites More sharing options...
clarke Posted April 7, 2011 Share Posted April 7, 2011 I got mine from alchemy too but very expensive (£70 8o) £13 would be a bargain!!! OR you could make your own: http://vstar1300.pbworks.com/w/page/5760698/Jack%27s-O2-Mod Graham Link to comment Share on other sites More sharing options...
Recommended Posts