Guest Mozzer Posted March 21, 2011 Posted March 21, 2011 I recently bought my DT125RE 2004 over a week ago, I paid £825.00 for the bike, taxed and tested, the lad who I bought it off had not looked after the bike and had no clue what so ever as you can see by the rear light wiring lol, although from the first picture, it looks in good order however, thers alot of work which needs doing, I could of just ridden it how it was but I like a good looking bike tbh. I started striping the bike down last week and it is now fully stripped, engines on the bench in need of a good clean, I will post a before and after picture when a get chance, the other pictures aren’t very good they where only for my reference, I have just got my swing arm sand blasted and going to get all the brackets and frame ect powder coated black. The tank also need re-painting, so I am in need of a full graphics kit and I am fancying the kit in the picture below, im not too keen on it tbh but just cant find what I want anywhere. I had to buy a rear calliper and found one on ebay, the original one was smashed by the previous owner because he let the pads wear down too much and got the piston stuck on the disk and decided to hit it with a brick to un-stick it :S < what a fuk up lol, came as a full rear set-up (£46.00 posted) In need of a rear disk as the one I have is bent, the clocks are in need of modification, the plastic is smashed which holds them together and to the bike :/. Apart from tarting the bike up ect, the engine is sweet and it’s had a re-build about 1000 miles ago, professionally lol let me what you ppl think
Moderator Airhead Posted March 21, 2011 Moderator Posted March 21, 2011 Good one mozzer, it is in very poor condition and it looks like it found you just in time isnt there someone in Portugal who does graphics kits? I think I saw something on here once. Hmm the frame...personally I like the original mettalised blue colour myself, black is a bit boring. Its going to look mint when youve done it, be sure to keep us updated with progress and pics. Ohh and a tail tidy is available for that model too.
Guest Mozzer Posted March 21, 2011 Posted March 21, 2011 yeh i no i was unsure with making the frame black and still could change my mind, i will have to see, i need to get it sorted n i will let u know moz
Guest Mozzer Posted March 22, 2011 Posted March 22, 2011 iv had the back swinger sand blasted and a dent taken out, got a bit of oil on the swinger from my mucky hands, oops lol also had to weld a new nut on the disc protector guard attachment thing, beause that was threaded too it looks pretty much new again, just needs painting. i also got a quote for all my bits to be powder coated (£100.00) that includes acid dipping the frame and brackets, but still unsure of colour of the frame :/, i do like the look of the DT125X, the frame looks good black but i will have to see lol moz
Moderator Airhead Posted March 22, 2011 Moderator Posted March 22, 2011 iv had the back swinger sand blasted and a dent taken out, got a bit of oil on the swinger from my mucky hands, oops lol also had to weld a new nut on the disc protector guard attachment thing, beause that was threaded too it looks pretty much new again, just needs painting. i also got a quote for all my bits to be powder coated (£100.00) that includes acid dipping the frame and brackets, but still unsure of colour of the frame :/, i do like the look of the DT125X, the frame looks good black but i will have to see lol moz Be sure to get all that oil off before painting / stoving. If you are stoving it dont forget to remove the pivot bushes.
Guest Mozzer Posted March 22, 2011 Posted March 22, 2011 yeh i no would be a shame to screw it up lol anyone know the paint codes for the tank and frame for these iv seen a post on this but no one has had a strait anser? moz
samslam2000uk Posted March 24, 2011 Posted March 24, 2011 http://stores.ebay.co.uk/motofiled That's the chap from portugal OG was on about
LiamDTR Posted March 26, 2011 Posted March 26, 2011 If you Email Philippe at the motofiled eBay shop and see if he can get them in, I've been dealing with him quite a lot the past few weeks and he goes above and beyond the call of duty, unfortunately most of the stuff he does is specifically for the DTR's due to the immense following they have in portugal. Worth a try none the less!! Be interesting to see the finished product Best of luck
Guest Mozzer Posted March 29, 2011 Posted March 29, 2011 yeh definately worth a try , i will follow up on that cheers , i will post some piks up of my progress soon, maybe today if i can find the piks i have taken moz
Guest Mozzer Posted May 9, 2011 Posted May 9, 2011 Well it has been while since i last posted, since then i have had my frame and other bits powder coated, i went with matt black frame (looks awsome), and gloss black swing arm, i am also currently spraying the fawk legs gloss black, i still need to re-paint my tank, i didnt have any luck with that guy from portugal he only really deals with the older dtr, so any help on the paint code ect would be great, if not im going to go to a car painting shop which my dads friend owns where he may be able to sort it out, i have cleaned the engine and other parts, i just need to laquer the fork legs and crack on getting it back togeather , view welcome cheers moz
GoProKid Posted December 30, 2013 Posted December 30, 2013 Looks good. I'm just starting a minor resto with my dt125re, best of luck you've come a long way with it!
Recommended Posts