Japfan Posted February 7, 2011 Share Posted February 7, 2011 Hi, Can anyone offer any advice please. I have replaced the cam and chain and am trying to replace the front camchain guide but it sits about an inch or so above the slot in the head when located in the holder in the front of crank case. My query is should it be flush in the slot or will the cover pull it down when fitted? though it does not feel very flexible. The rear one with the adjuster is fine. Any help appreciated, thanks in advance. Mick Link to comment Share on other sites More sharing options...
Moderator drewpy Posted February 7, 2011 Moderator Share Posted February 7, 2011 make sure the blade is located right down in the block. It's definatley flush with the top of the block Link to comment Share on other sites More sharing options...
Japfan Posted February 8, 2011 Author Share Posted February 8, 2011 Thanks for that, a little bit of jiggling did the trick Link to comment Share on other sites More sharing options...
Moderator drewpy Posted February 8, 2011 Moderator Share Posted February 8, 2011 jiggy jiggy, now that's something else Link to comment Share on other sites More sharing options...
Recommended Posts