Jackelhunter Posted January 30, 2011 Posted January 30, 2011 Can any one tell me how to find and adjust the carb as I think she is running to rich . I had to replace the carb and now I have a nice loud popping sound when she starts up and runs and then when she idles she does the same even though its not to loud its should not be. Because its a trike the Yamaha dealer wont touch it so I am on my own (they wont touch trikes even though its not been modified much and I only want the engine looked at )I have a xv750 virago . thanks
Moderator drewpy Posted January 30, 2011 Moderator Posted January 30, 2011 Can any one tell me how to find and adjust the carb as I think she is running to rich . I had to replace the carb and now I have a nice loud popping sound when she starts up and runs and then when she idles she does the same even though its not to loud its should not be. Because its a trike the Yamaha dealer wont touch it so I am on my own (they wont touch trikes even though its not been modified much and I only want the engine looked at )I have a xv750 virago . thanks have you downloaded a service manual? not sure on your carbs so that would be the best place to start
Moderator Airhead Posted January 30, 2011 Moderator Posted January 30, 2011 They wont touch it bacause it wont go in their bike lift and health and safety says they must not bend over
Jackelhunter Posted January 31, 2011 Author Posted January 31, 2011 Yes and its still seems a puzzle on how to do it
2 Wheels Posted January 31, 2011 Posted January 31, 2011 Send us a few pics of the carb. Is it that you dont know where the adjustment screws are ? It does sound as though its running rich,,,,,,,,,,popping and the like. Have you pulled the plugs for a look ?
Moderator Airhead Posted January 31, 2011 Moderator Posted January 31, 2011 Post a good picture of the carb adjusters and we'll gave a guess, unless someone who knows shows up, or better still get a haynes manual?
xv535 Posted February 1, 2011 Posted February 1, 2011 Jackelhunter You could have an air leak in the rubber intake boot between the carb and the cylinder or need to replace the O ring in the boot. I had a similar noise problem last summer. We spent a lot of time screwing around with the carb and that was not the problem. The O ring had failed. See my comments under the current post topic "Tap tap tap". Rocky
Recommended Posts