solorider Posted October 17, 2004 Share Posted October 17, 2004 any one any idea how i plug the power valve servo into the bike on a 1989 bike? i hav looked high and low for the plug and come ti the conclussion the bike doesnt have the plug so any one have any ideas how i get my power valve to work?the power valve motor ive got has a 4 pin plug and a seperate wire and from the wiring diagram all go to the cdi unit ,my bike has a spare plug with black and brown wires and another single wire,any ideas how to wire up this motor? Link to comment Share on other sites More sharing options...
mickt26 Posted November 12, 2004 Share Posted November 12, 2004 Hi, You also need a powervalve controller which plugs into the CDI. The servo then plugs into the controller. On later models the controller and CDI were integrated. A controller off a TZR250 will work and are perhaps a little easier/cheaper to get hold of. Hope this helps, Mick. Link to comment Share on other sites More sharing options...
Recommended Posts