muppet Posted October 9, 2010 Share Posted October 9, 2010 I need some help please. I replaced the loose bearings with the one below but when i try to refit the clocks they are not close enough for the top yokes and headlight frame to bolt back together. Will the item i fitted not work or am i doing something wrong? http://www.wemoto.com/bikes/Yamaha/DT_125_R/90/picture/Tapered_Headrace_Top_Bearing/ Link to comment Share on other sites More sharing options...
Moderator drewpy Posted October 9, 2010 Moderator Share Posted October 9, 2010 I need some help please. I replaced the loose bearings with the one below but when i try to refit the clocks they are not close enough for the top yokes and headlight frame to bolt back together. Will the item i fitted not work or am i doing something wrong? http://www.wemoto.com/bikes/Yamaha/DT_125_R/90/picture/Tapered_Headrace_Top_Bearing/ they all do that sir, tapered bearings are always a couple of mill higher, just make sure they are seated. If you can get rid of any thing that may contribute to that, take it off. I had to take off a sealing ring on my xs to fit mine and they were still a bit high Link to comment Share on other sites More sharing options...
muppet Posted October 10, 2010 Author Share Posted October 10, 2010 Thanks for the answer but ive now gone and ordered the ball bearings at 20p each. It was just too high for what i liked and i'd just had enough of trying to get it right no matter what i tried, in the end i was just not happy with the height difference. Link to comment Share on other sites More sharing options...
Recommended Posts