Paulwhite Posted October 5, 2010 Share Posted October 5, 2010 right a reg/rect converts ac power to dc power so in theory they are all the same just wierd up for the model of bike? am i right? iv got a honda cbr 125 engine but havent got a reg/rect but i do have one for a 125 drag so in theory i could just get hold of the wiering diagrams and splice the yam reg/rect and connector to the honda loom? would save me about 60 to 80 quid! but i dont want owt to blow up on me any help would b grateful cheers. .Paul. Link to comment Share on other sites More sharing options...
Speedshop Posted October 6, 2010 Share Posted October 6, 2010 Well the theory is fine, if you work out which wire does what. You need to check if the voltage is the same IE 6 or 12 volt electrics, then check if the generator type is the same, perment magnet or field controlled. It should be, I doubt you'd find a field controlled generator on a 125. Then if its single or 3 phase. Get all that right then yes you can use a regulator from a different machine. Link to comment Share on other sites More sharing options...
Paulwhite Posted October 7, 2010 Author Share Posted October 7, 2010 sound. nice one the 2 bikes are both 12v and i havent taken the side cover off to have a look at the flywheel yet but should be similar just got to get my hands on some wiering diagrams lol but yeah cheers for the info. Link to comment Share on other sites More sharing options...
Recommended Posts