ging Posted September 19, 2010 Share Posted September 19, 2010 hello guys i have a DTR 125 and some one has told me to put a DEP exaust on it to make it go a little faster .so i had a look and there like 200 to 250 pound is there anything i can do to my exaust instead .thanks dave Link to comment Share on other sites More sharing options...
Vez Posted September 19, 2010 Share Posted September 19, 2010 hello guys i have a DTR 125 and some one has told me to put a DEP exaust on it to make it go a little faster .so i had a look and there like 200 to 250 pound is there anything i can do to my exaust instead .thanks dave What year? Link to comment Share on other sites More sharing options...
ging Posted September 19, 2010 Author Share Posted September 19, 2010 What year? 2002 mate what you think Link to comment Share on other sites More sharing options...
2 Wheels Posted September 19, 2010 Share Posted September 19, 2010 Did ya not read the link i sent to you in your other post. !!!!! !!!!! !!!!! its about de-restricting a 02 DTR 125 !!!!! !!!!! !!!!! Link to comment Share on other sites More sharing options...
ging Posted September 19, 2010 Author Share Posted September 19, 2010 Did ya not read the link i sent to you in your other post. !!!!! !!!!! !!!!! its about de-restricting a 02 DTR 125 !!!!! !!!!! !!!!! yes mate i dant but i dant get it. have i got to buy a new exaust or take the old one of and if so what do i do next Link to comment Share on other sites More sharing options...
ging Posted September 19, 2010 Author Share Posted September 19, 2010 Did ya not read the link i sent to you in your other post. !!!!! !!!!! !!!!! its about de-restricting a 02 DTR 125 !!!!! !!!!! !!!!! can u send it again i cant find it thanks for your help by the way Link to comment Share on other sites More sharing options...
2 Wheels Posted September 19, 2010 Share Posted September 19, 2010 can u send it again i cant find it thanks for your help by the way http://www.yamahaclub.com/forums/topic/20583-de-restricting-my-dt125r/ Link to comment Share on other sites More sharing options...
ging Posted September 19, 2010 Author Share Posted September 19, 2010 http://www.yamahaclub.com/forums/topic/20583-de-restricting-my-dt125r/ so i take my esaust off what do i have to take out the beveld pipe or just cut off the bevel and put it back in Link to comment Share on other sites More sharing options...
2 Wheels Posted September 19, 2010 Share Posted September 19, 2010 yes mate i dant but i dant get it. have i got to buy a new exaust or take the old one of and if so what do i do next If ya cant redline your bike in 4th or 5th gear then you have either one or both of these things 1) your reed switch in the speedo needs to come out (dont cut the wires) 2)your exhaust is restricted in the front section,,,,,,take it off and look up it. there is a cone shape bit in it that needs to be cut out. Do this and you will have the ability to fully rev your bike and blow the balls out of it if ya want. Read the rest of the link and do the rest of the stuff to if ya want but this much should make ya happy,,,,,,,,,YOU should also TELL your insurance company or your insurance will be void ! Link to comment Share on other sites More sharing options...
Moderator Airhead Posted September 19, 2010 Moderator Share Posted September 19, 2010 Only exhausts that have a number stamped on them 3MB-14610 will have the restrictor in them. If yours is that version take it off and have a look. While it's off check your PV is set up right, Turn key ON, after cleaning cycle check the slot in the pulley is aligned with the 4mm hole behind it...turn key OFF, then look in the exhaust port to see that the PV is flush with the top of the port. Link to comment Share on other sites More sharing options...
ging Posted September 20, 2010 Author Share Posted September 20, 2010 Only exhausts that have a number stamped on them 3MB-14610 will have the restrictor in them. If yours is that version take it off and have a look. While it's off check your PV is set up right, Turn key ON, after cleaning cycle check the slot in the pulley is aligned with the 4mm hole behind it...turn key OFF, then look in the exhaust port to see that the PV is flush with the top of the port. were is the number on the exaust mate Link to comment Share on other sites More sharing options...
ging Posted September 20, 2010 Author Share Posted September 20, 2010 If ya cant redline your bike in 4th or 5th gear then you have either one or both of these things 1) your reed switch in the speedo needs to come out (dont cut the wires) 2)your exhaust is restricted in the front section,,,,,,take it off and look up it. there is a cone shape bit in it that needs to be cut out. Do this and you will have the ability to fully rev your bike and blow the balls out of it if ya want. Read the rest of the link and do the rest of the stuff to if ya want but this much should make ya happy,,,,,,,,,YOU should also TELL your insurance company or your insurance will be void ! thanks pal your a star Link to comment Share on other sites More sharing options...
Moderator Airhead Posted September 20, 2010 Moderator Share Posted September 20, 2010 were is the number on the exaust mate so youre not a policeman then ging It's here Link to comment Share on other sites More sharing options...
ging Posted September 20, 2010 Author Share Posted September 20, 2010 mate i've fucked my exaust right up any chance you can give me half towords a new one pal if so i will have a full DEP EXAUST Link to comment Share on other sites More sharing options...
Moderator Airhead Posted September 20, 2010 Moderator Share Posted September 20, 2010 Eh? Link to comment Share on other sites More sharing options...
Moderator Airhead Posted September 21, 2010 Moderator Share Posted September 21, 2010 Eh? ????? Link to comment Share on other sites More sharing options...
AndyDtr08 Posted July 7, 2012 Share Posted July 7, 2012 Just found this through a google search of "3MB-14610". What planet was this guy on? Was he asking someone to pay half towards his new DEP exhaust? Link to comment Share on other sites More sharing options...
Grizzle Posted July 7, 2012 Share Posted July 7, 2012 Ha ha, cheeky beggar. Link to comment Share on other sites More sharing options...
Ryan09 Posted July 7, 2012 Share Posted July 7, 2012 Wow some people.. Link to comment Share on other sites More sharing options...
Recommended Posts