DomT Posted August 19, 2010 Share Posted August 19, 2010 the yb100s a bit smokey when standing started (not moving). and tick over non exictent any ideas im abit stumpded on mikuni carbs. Link to comment Share on other sites More sharing options...
Moderator Airhead Posted August 20, 2010 Moderator Share Posted August 20, 2010 the yb100s a bit smokey when standing started (not moving). and tick over non exictent any ideas im abit stumpded on mikuni carbs. Does the smoke clear after a good run, is it blue smoke ie 2T oil smoke. Are you saying bit wont idle? Turn the throttle stop screw in a bit at a time until it does, set the mixture screw about 1 1/2 turns out (a guess) Link to comment Share on other sites More sharing options...
webi Posted August 20, 2010 Share Posted August 20, 2010 do you have any trouble starting the bike and is the gearbox oil going down it could be crank seals. the mixture screw is 1/2 turns out on my manual Link to comment Share on other sites More sharing options...
Moderator Airhead Posted August 20, 2010 Moderator Share Posted August 20, 2010 the mixture screw is 1/2 turns out on my manual 1/2 or 1 1/2 Webi? Link to comment Share on other sites More sharing options...
DomT Posted August 24, 2010 Author Share Posted August 24, 2010 Does the smoke clear after a good run, is it blue smoke ie 2T oil smoke. Are you saying bit wont idle? Turn the throttle stop screw in a bit at a time until it does, set the mixture screw about 1 1/2 turns out (a guess) not able to give a run, private land needed to run its less smokey now Link to comment Share on other sites More sharing options...
DomT Posted August 24, 2010 Author Share Posted August 24, 2010 do you have any trouble starting the bike and is the gearbox oil going down it could be crank seals. the mixture screw is 1/2 turns out on my manual no problems on starting and ok ill try that Link to comment Share on other sites More sharing options...
Recommended Posts