DomT Posted August 19, 2010 Posted August 19, 2010 the yb100s a bit smokey when standing started (not moving). and tick over non exictent any ideas im abit stumpded on mikuni carbs.
Moderator Airhead Posted August 20, 2010 Moderator Posted August 20, 2010 the yb100s a bit smokey when standing started (not moving). and tick over non exictent any ideas im abit stumpded on mikuni carbs. Does the smoke clear after a good run, is it blue smoke ie 2T oil smoke. Are you saying bit wont idle? Turn the throttle stop screw in a bit at a time until it does, set the mixture screw about 1 1/2 turns out (a guess)
webi Posted August 20, 2010 Posted August 20, 2010 do you have any trouble starting the bike and is the gearbox oil going down it could be crank seals. the mixture screw is 1/2 turns out on my manual
Moderator Airhead Posted August 20, 2010 Moderator Posted August 20, 2010 the mixture screw is 1/2 turns out on my manual 1/2 or 1 1/2 Webi?
DomT Posted August 24, 2010 Author Posted August 24, 2010 Does the smoke clear after a good run, is it blue smoke ie 2T oil smoke. Are you saying bit wont idle? Turn the throttle stop screw in a bit at a time until it does, set the mixture screw about 1 1/2 turns out (a guess) not able to give a run, private land needed to run its less smokey now
DomT Posted August 24, 2010 Author Posted August 24, 2010 do you have any trouble starting the bike and is the gearbox oil going down it could be crank seals. the mixture screw is 1/2 turns out on my manual no problems on starting and ok ill try that
Recommended Posts