Jump to content

Belated Greetings


Emzed
This post is 5214 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

Hya folks, I've been riding and tinkering with bikes ,scooters and cars since 1964.

I've already had some excellent advice from the "workshop" forum but have ommited to make my formal introduction through this section.

So I'll APOLOGISE to everyone for my bad manners and hope you'll forgive my a***e about face intro.

Many thanks to Paul (O.G.O.A.B.) for his "sage advice" regarding my starter switch troubles,

(still working on that one, domestic duties intervened)

I hope to be a regular visitor/contributor to the forums and if I can help in any way I will.

Modern bike electrics sometimes baffle me :unsure: my Beeza's only had 6 wires and I regularly made up new wiring for them and the Velo's (they were complicated Miller lighting sets with 8 or 10)

I've had great fun browsing the forums and previous threads and I look forward to many more hours of happy banter this winter, cos I'm hoping to be out and about soon, if I ever get this SR on the road :unsure:

Ciao4now

Em B)

Link to comment
Share on other sites

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.

Welcome Emzed" [ MZ ] ?:unsure: as in CZ,, , any way Nrth yorks ? not far from squires Caffe ,;) ;) ,,,,,,,,,,Remember remember " the 4th of september,B)

Link to comment
Share on other sites

Welcome Emzed" [ MZ ] ?:unsure: as in CZ,, , any way Nrth yorks ? not far from squires Caffe ,;) ;) ,,,,,,,,,,Remember remember " the 4th of september,B)

I'll forgive your lack of respect for the greatest 2 stroke ever (MZ) [RIP Walter]

CZ's never quite made a bike that worked :-( , something to do with building a bike DOWN to a price rather than building one to a "specification" and then trading it for what it would fetch in foreign currency.

If I ever get a bike back on the road I'll be back at Squires,

(I used to go to the ORIGINAL one in the 60's)

I was there last year a couple of times but I don't get the same buzz out of the place when its full of plastic :-(

Em B)

Link to comment
Share on other sites

  • Moderator

I'll forgive your lack of respect for the greatest 2 stroke ever (MZ) [RIP Walter]

CZ's never quite made a bike that worked :-( , something to do with building a bike DOWN to a price rather than building one to a "specification" and then trading it for what it would fetch in foreign currency.

If I ever get a bike back on the road I'll be back at Squires,

(I used to go to the ORIGINAL one in the 60's)

I was there last year a couple of times but I don't get the same buzz out of the place when its full of plastic :-(

Em B)

CZ used to make all conquering championship MX bikes i'll have you know...whose showing a lack of respect now :unsure:

http://mysite.ncnetwork.net/jawaman/CZmx3.htm

Link to comment
Share on other sites

CZ used to make all conquering championship MX bikes

Only after the "FATHER" of the modern 2 stroke, Walter Kaaden (RIP) had shown the way.

Take a look at the run of ISDT wins in the 60's :thumb:

I was referring to road bikes though, as in my experience the CZ's were rubbish compared to the MZ's.

The ISDT 250 replica was good for 100 mph "out of the crate" :icon_biggrin:

But it's all academic now, each to their own, and Jawa made world beating 4 stroke speedway bikes if my memory serves me right :unsure:

Happy days

Ciao

Em B)

Link to comment
Share on other sites

  • Moderator

I was referring to road bikes though, as in my experience the CZ's were rubbish compared to the MZ's.

Yeah your right, there was no comarison between the competition and the road bikes.

When i was at school though I used to look longingly at the CZ175 trail bike,,,,aaaahhhhhhahahahahaaahhhhaha :lol:

Link to comment
Share on other sites

Thanks for the multifareous welcomes peeps, all good clean stuff :)

With luck and a fair bit of help from you guys (& gals), I'll be mobile soon :thumb:

I'm sure we'll all get along just fine.

After the SR is up an struttin its stuff, it's Duke's turn to suffer the ravages of a re-build :unsure:

Specialist attention needed there I'm afraid :( mighty costly too :(

So little Yam will have to earn his keep and provide daily transport in all weathers, such a shame after I've made it look quite smart after being trashed within an inch (or should that be millimetre ?) of its life.

Still it's almost restored to its former glory now. Just a lick o paint and a few minor "glitches" to sort :)

Play nicely now

Em B)

Link to comment
Share on other sites

Fantastic belated intro Emzed. :thumb:

Cheers Mike, sorry too, for the belated thanks.

I've been busy sortin "Little" Yam :wacko:

I have now got it sorted (I hope)

(havin had to re-solder the other switch (horn button and indicators [which are not fitted] cos it was a constant BlEEEEEEEEEEEEEEEEEEEEEEEEp when I turned on the ignition switch)

Anyhow, all seems tickety-boo at the mo :-)

Just fork oil to add when my pension goes in the bank and its off for the MOT :-)

Ciao4now

Em B)

Link to comment
Share on other sites

Welcome Emzed,

And thank you for making me feel young again with all this talk of bikes from before my time :D.

Vez.

Link to comment
Share on other sites

  • Who's Online (See full list)

    • There are no registered users currently online
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...