tonytony Posted May 4, 2010 Share Posted May 4, 2010 Evening All I have a 2nd question in as many days... Yam xvs 650 1997 front brake master cylinder kit Does anybody know if/where I can get some new seals for front master cylinder as Yamaha want to charge an arm, a leg and a pint of blood.. In their infinate wisdom Yamaha made these seals VERY special.. My brake seal stockist says that on measuring the 2 seals some dimensions are metric and some imperial My measurements for the 2 seals are... 1st seal (small) is od = 13mm,,,,,id = 5.75mm,,,,,, height = 3.5mm 2nd seal (larger) is od = 13mm,,,,,id = 7.8mm,,,,,,, height = 4mm Hope someone else has had the same problem and found a solution cheers Tony Link to comment Share on other sites More sharing options...
Moderator drewpy Posted May 5, 2010 Moderator Share Posted May 5, 2010 try this site Tony http://the-parts-hound.bizhosting.com/mrk.htm Link to comment Share on other sites More sharing options...
tonytony Posted May 8, 2010 Author Share Posted May 8, 2010 try this site Tony http://the-parts-hound.bizhosting.com/mrk.htm Link to comment Share on other sites More sharing options...
tonytony Posted May 8, 2010 Author Share Posted May 8, 2010 Hi There, Thanks for reply,, I've just tried the site and it covers a lot of models but doesn't show mine, so I've emailed them but they haven't replied Many Thanks Tony Link to comment Share on other sites More sharing options...
Recommended Posts