Jump to content

spinning clutch yamaha dt125lc (autisa 170cc)


Bosse
This post is 5327 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.
  • Moderator

has changed everything in the clutch slip a bit when the engine is cold help

So, you have fitted the 170kit and now the clutch is slipping?

The clutch should just about handle it if it is in good nick, make sure it is properly adjusted so it isn't holding the clutch open and causing the slip.

If everything is adjusted ok then you will have to strip and check the clutch. If it has been slipping for a while then you will most likely need to replace the friction AND the metal plates as the metal plates warp very easily(personal experience), its worth changing them out to get the best from the big bore. Finally with the new clutch a set of heavy duty springs will really help.

Good luck..

Link to comment
Share on other sites

the clutch slip a bit when the engine is cold help

WHAT Oil you using ? [ not car oil] also av heard bead blasting the steel plates can help ,,unsure.gif more friction ,,

Link to comment
Share on other sites

  • Who's Online (See full list)

    • There are no registered users currently online
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...