Paulwhite Posted April 8, 2010 Share Posted April 8, 2010 hi all im rebuilding me xvs dragstar 125 the engine blew so im putting in a 125cc pit bike engine. Im also going to be removing the rear suspension in favor of a couple of steel supports, make me own fenders and at some point will be fitting a bobber seat, the rest of the bike will be standard. just wanted to know if anyone knew what would be involved with getting this creation on the road? iv never done this before so dont have a clue where to start. any advice would be appreciated cheers . Paul . Link to comment Share on other sites More sharing options...
vic-fzr600 Posted April 8, 2010 Share Posted April 8, 2010 I'd advise to keep the suspension -unless u live on some silky smooth roads. Link to comment Share on other sites More sharing options...
Paulwhite Posted April 8, 2010 Author Share Posted April 8, 2010 well i thought the bobber seat would replace the suspension in the way of comfort. i will be making the seat by hand so i could make it as hard or soft as i like but the idea of loosing the suspension is to lower it as i cant find anything other than push bike springs that are small enough to do it , but i just need to know what i need to do to get it back on the road. Link to comment Share on other sites More sharing options...
Recommended Posts