Kawasakifreak Posted March 18, 2010 Share Posted March 18, 2010 The Haynes manual shows the FZR600 3HE cams clearly marked 'In' & 'Ex' but my FZR600R 4JH only has 'E' marked on one of them & I can't make out what the other mark is. The local Yamaha dealer doesn't know ! Anyone know for sure if the attached photo is the exhaust cam pls ? Thanks. Link to comment Share on other sites More sharing options...
YPVS TONE Posted March 18, 2010 Share Posted March 18, 2010 In the haynes manual on the FZ600 it says the cams are marked "I" for the inlet cam and "E" for the exhaust cam. Tony. Link to comment Share on other sites More sharing options...
bonzoid60 Posted March 25, 2010 Share Posted March 25, 2010 Thundercat motor (which is basically a tweaked FZR unit) has camshafts marked "I" for inlet & "E" for exhaust. Link to comment Share on other sites More sharing options...
Kawasakifreak Posted April 2, 2010 Author Share Posted April 2, 2010 Thundercat motor (which is basically a tweaked FZR unit) has camshafts marked "I" for inlet & "E" for exhaust. Thanks - thought so but nice to have it confirmed. Link to comment Share on other sites More sharing options...
Recommended Posts