Samwhitt69 Posted January 24, 2010 Share Posted January 24, 2010 Hi, im new to the forum Ive recently bought a 1985 DT50 MX, brilliant condition but all standard. I am not yet 16 but the old owner told me that it does 45mph which is ok but i wish to improve it Ive seen these Hy-Tec Reed Valves they're only £10, and promise to boost acceleration, are they as good as they say and are they hard to fit? Any other sugestions to upgrade the bike im all ears Thanks Sam Link to comment Share on other sites More sharing options...
blackhat250 Posted January 24, 2010 Share Posted January 24, 2010 Hi, im new to the forum 1985 DT50 MX, Any other sugestions to upgrade the bike im all ears Welcome Sam ,, if u search [ forum] for Wild foamy , and search for his posts , U will find out a lot of mods [engine] that he has done, Uwill also see the disasters T00 Exspensive , so tread carefully with the engine mods , Link to comment Share on other sites More sharing options...
Moderator Cynic Posted January 24, 2010 Moderator Share Posted January 24, 2010 Hi, im new to the forum Ive recently bought a 1985 DT50 MX, brilliant condition but all standard. I am not yet 16 but the old owner told me that it does 45mph which is ok but i wish to improve it Ive seen these Hy-Tec Reed Valves they're only £10, and promise to boost acceleration, are they as good as they say and are they hard to fit? Any other sugestions to upgrade the bike im all ears Thanks Sam You are probably going to think i'm being really boring here but if it is in 'brilliant condition' and all standard doing 45mph reeds are about all i'd want to change. There is beleive it or not a growing group of people that ride these things to shows all over the country. If you keep it real nice and un messed with for 12 months you will get your money back real easy. Link to comment Share on other sites More sharing options...
dudeboy52 Posted September 7, 2010 Share Posted September 7, 2010 Has yours had a big bore kit fitted? As i have the high tech reeds in mine but it will only do 47mph Link to comment Share on other sites More sharing options...
wild foamy Posted September 25, 2010 Share Posted September 25, 2010 if it is doing 45 as standard, no doubt it has already been modified, mine was stock when i got it apart from an exhaust system and that did 35. but with a 60cc bore kit, fibre reeds, biggest front sprocket i could find, smallest rear socket i could find, cone air filter and just about anything else i could find for it, i got 55 out of mine maximum speed, trouble was being only a five speed it would be revving its bollocks off and overheat if you took it about 40mph for more than about 5 minutes. dont fuck with it, thats about as fast as it will ever be, keep it in good condition until your old enough for a big bike, then sell me the DT oh, and if i didnt say before, dont fuck with it Link to comment Share on other sites More sharing options...
Recommended Posts