MalcolmX Posted December 31, 2009 Posted December 31, 2009 Can anyone help me out? I've just gt my hands on my absolute pride an joy lol xt125, first bike. But does anyone have any tips on how to get the most out of it?? Riding tips? Exhaust kits? DIY mods?? Plz let me know. Thanxing you very much long time =]
stringal Posted January 4, 2010 Posted January 4, 2010 Advise.... Some 4 wheeler will look right at you but pull out in front of you anyway... On two wheels you have wrapped an invisibility cloak about yourself and, be ready, someone will put a ton of steel in your path...
MisterDave Posted January 15, 2010 Posted January 15, 2010 I have just bought the XT125X First bike I have looked around and I don't think there are really any mods or 'getting the most' out of it other than keeping it clean. oooh my horn has just stopped working too, how do I fix that?
MalcolmX Posted February 1, 2010 Author Posted February 1, 2010 I've been having quite a few probs with my bike recently. I really dont know whats up. I just cleaned out the carb and jets, but now when i start it up it will idle for a bit then when i try and use the clutch it will try to rev more power but just chudder if u get what i mean and then cut out. Does it do this if my engine doesnt have enough oil??? Because i know this is something i need to do today, but whether this is the sole reason for it not working properly. i do not know PLEASE HELP ME!! I GET PAYED FROM WORK IN 3 WEEKS AND HAVE NO WAY OF SERVICING BIKE! =[
2 Wheels Posted February 1, 2010 Posted February 1, 2010 I've been having quite a few probs with my bike recently. I really dont know whats up. I just cleaned out the carb and jets, but now when i start it up it will idle for a bit then when i try and use the clutch it will try to rev more power but just chudder if u get what i mean and then cut out. Does it do this if my engine doesnt have enough oil??? Because i know this is something i need to do today, but whether this is the sole reason for it not working properly. i do not know PLEASE HELP ME!! I GET PAYED FROM WORK IN 3 WEEKS AND HAVE NO WAY OF SERVICING BIKE! =[ Did the bike ever run properly before you done anything to it r did you get it with these probs? If you start it, will it stay idleing on its own for a while? Can you rev it up while in neutral? Does it start easy? Tell us what is happening from the time you start it till the time it cuts out !!!
Moderator YamaHead Posted February 1, 2010 Moderator Posted February 1, 2010 Sounds like you may have created an "issue" with your Pilot Jet Malcolm..... It'll idle fine until you apply a bit more throttle & it feels like the shuddering you speak of which also equates to a bit of fuel starvation. FYI....If your oil level is low....you'll know it by the amount of excess noise coming from the head @ idle.
Moderator Airhead Posted February 1, 2010 Moderator Posted February 1, 2010 then when i try and use the clutch it will try to rev more power but just chudder if u get what i mean and then cut out. Sounds like you dont know your clutch from your throttle, if thats the case what were you doing stripping the carb down. Dont you mean then when i try and use the clutch throttle it will try to rev more power but just chudder if u get what i mean and then cut out.
MalcolmX Posted February 15, 2010 Author Posted February 15, 2010 Sounds like you dont know your clutch from your throttle, if thats the case what were you doing stripping the carb down. Dont you mean then when i try and use the clutch throttle it will try to rev more power but just chudder if u get what i mean and then cut out. Thanks for stating the obvious old git, was a typo. Have sorted this prob out, there was something that got wedged in my air filter. All good now. But can anyone let me know where i can get my hands on a performance CDI for the bike. I have been looking everywhere, but to no avail. I have the same engine as a TTR 125 but don't think this will make any difference. It has a 6 pin small head adapter, roughly an inch wide. Anybody who has any info please let me know, will be forever grateful. Am getting my flywheel sent off next week to get lightened. Hopefully will be on the back wheel no problem after that!! Happy riding guys! Even though my nuts are like raisins!
MalcolmX Posted February 17, 2010 Author Posted February 17, 2010 Updating again. I've been looking round and managed to get myself a part exchange with a 54 plate DT x. It looks beautiful and already has a DEP exhaust fitted. I didnt actually realise how small the Xt was until riding it fo about a week or 2. Being a 6'2ft, 14 and half stone guy, this really is'nt the best bike. Would recommend anyone of my height and weight to avoid Xts. Also, my Xt will not hit over 57 on a flat. I WANT MY DT
Moderator Airhead Posted February 17, 2010 Moderator Posted February 17, 2010 At the risk of stating the obvious again..Good move
MalcolmX Posted February 17, 2010 Author Posted February 17, 2010 At the risk of stating the obvious again..Good move haha its such a beauty, i think im in love Costing me a bit of bloody bob though. The price is £1695 with 6500 miles. Is this good or should i look for a bargain?? Its in a really nice condition, and im hopefully getting £1000 for the XT (i hope) I really should of made my mind up b4 buying that darn XT GRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
Moderator Airhead Posted February 17, 2010 Moderator Posted February 17, 2010 Sounds fair enough to me, DEP exhausts are not cheap and very low mileage too. Tip...Dep exhausts look good when new but not so good when rusty...if it still looks good then keep it that way with very regular cleaning especially at the header end.
Moderator Cynic Posted February 17, 2010 Moderator Posted February 17, 2010 Sounds fair enough to me, DEP exhausts are not cheap and very low mileage too. Tip...Dep exhausts look good when new but not so good when rusty...if it still looks good then keep it that way with very regular cleaning especially at the header end. Remind me never to play poker with you OG.
MalcolmX Posted March 1, 2010 Author Posted March 1, 2010 i did'nt go through with the exchange after all. im keeping hold of my Xt for a while me thinks. Looking for an Mx or DT again. If any of you guys see or hear about them, please let me know. Im preferably looking for a low mileage insurance write off to work on over the coming summer months =] thanks
XTownr Posted May 4, 2010 Posted May 4, 2010 Hi, bought an xt about a week and a hlaf ago been fine, up until yesterday. went out saturday night was running fine, came to it sunday morning and had a wee problem. The bike starts and idles fine, however upon any application of the throttle the engine cuts out. the other strange thing is that when i pull the choke to the fully in position, the bike can be revved, but only only a half turn until it cuts out again. any ideas as to what it could be?? any help would be greatly appreciated. Andy
Moderator Airhead Posted May 4, 2010 Moderator Posted May 4, 2010 Drain the float bowl on the carb, there may be some crud or water in there. You may see a drain screw somewhere at the bottom of the bowl.
Recommended Posts