allsaintchris Posted December 30, 2009 Share Posted December 30, 2009 Hi there, Is it possible to change the gear selector on a YBR125 Custom? Have always found it to be a bit short and too low as I have, to put it politey, big fat feet. Have just purchased a set of bike boots and this has now exaggerated the problem to the extent I have to change gear with the side of the boot as I cannot hook the boot under the selector. Are there different size selectors avaialbe that can be fitted or can I adjust the positioning of the one on the bike so it is higher to enable me to hook the end of my boot underneath it? Thanks Link to comment Share on other sites More sharing options...
Moderator Airhead Posted December 30, 2009 Moderator Share Posted December 30, 2009 Hi, have a read of This Link to comment Share on other sites More sharing options...
allsaintchris Posted December 30, 2009 Author Share Posted December 30, 2009 Hi, have a read of This Must have used the search engine wrong as tried to do a search on it and it didn;t come up with anything. I'll get on to the dealer and have it adjusted , failing that i'll become a contortionist! Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts