bznchris Posted December 21, 2009 Share Posted December 21, 2009 The previous owner modified the stock exhaust into a 2 into 1 style. However, he didn't think of oil filter cover access when he did so. So as it is now, I have to remove the exhaust to change the oil. And I'm not liking that. I did a little searching for complete 2 into 1 systems and found this on ebay: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=150391795363&crlp=1_263602_263622&ff4=263602_263622&viewitem=&guid=19c3d9971250a0b582e041e0ffda7233&rvr_id=&ua=WVF%3F&itemid=150391795363 Has anyone tried one of these? How is the fit? How is the sound? Thanks! Link to comment Share on other sites More sharing options...
Moderator drewpy Posted December 22, 2009 Moderator Share Posted December 22, 2009 The previous owner modified the stock exhaust into a 2 into 1 style. However, he didn't think of oil filter cover access when he did so. So as it is now, I have to remove the exhaust to change the oil. And I'm not liking that. I did a little searching for complete 2 into 1 systems and found this on ebay: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=150391795363&crlp=1_263602_263622&ff4=263602_263622&viewitem=&guid=19c3d9971250a0b582e041e0ffda7233&rvr_id=&ua=WVF%3F&itemid=150391795363 Has anyone tried one of these? How is the fit? How is the sound? Thanks! reading on this forum somewhere, they don't sound good and not good on power!! hopefully someone who has actually used one can commet further these look cool and could be adapted HERE drewps Link to comment Share on other sites More sharing options...
bznchris Posted December 24, 2009 Author Share Posted December 24, 2009 reading on this forum somewhere, they don't sound good and not good on power!! hopefully someone who has actually used one can commet further these look cool and could be adapted HERE drewps appreciate it, drewpy. 36 euros to ship one of those little mufflers stateside though! ouch! I guess I'm more looking for a set of pipes that would allow access to the oil filter. I could weld the muffler I have onto them. Link to comment Share on other sites More sharing options...
Moderator drewpy Posted December 24, 2009 Moderator Share Posted December 24, 2009 you can get a set of pipes made up for you. A friend did and it only cost £60 for the two and it was in stainless steel!! Link to comment Share on other sites More sharing options...
bznchris Posted December 24, 2009 Author Share Posted December 24, 2009 you can get a set of pipes made up for you. A friend did and it only cost £60 for the two and it was in stainless steel!! hmmmmmmmm. stainless steel would be nice since they're getting covered by exhaust wrap. I'll have to look into that. Link to comment Share on other sites More sharing options...
armyofda12mnkeys Posted December 26, 2009 Share Posted December 26, 2009 Would these 'peashooters' work on a 1978 XS400 lol? http://cgi.ebay.com/ebaymotors/Norton-Commando-Reverse-Cone-Seamless-Mufflers_W0QQcmdZViewItemQQhashZitem4836deda4fQQitemZ310158219855QQptZMotorcyclesQ5fPartsQ5fAccessories Are oil filter/drain plug clearance issues only related to the headpipes and not the muffler itself (motorcycle newbie, never replaced my oil yet!, so not sure of the answer). Link to comment Share on other sites More sharing options...
bznchris Posted December 30, 2009 Author Share Posted December 30, 2009 Would these 'peashooters' work on a 1978 XS400 lol? http://cgi.ebay.com/ebaymotors/Norton-Commando-Reverse-Cone-Seamless-Mufflers_W0QQcmdZViewItemQQhashZitem4836deda4fQQitemZ310158219855QQptZMotorcyclesQ5fPartsQ5fAccessories Are oil filter/drain plug clearance issues only related to the headpipes and not the muffler itself (motorcycle newbie, never replaced my oil yet!, so not sure of the answer). You could probably get those to work. It looks like the outlet on those mufflers might constrict exhaust flow though; I'd probably stay away from them myself. And yes, oil filter/drain plug issues are affected by the placement of the pipes. The previous owner of my bike modified the pipes into a 2 into 1 system and one of the pipes runs directly across the oil filter leaving no room to remove the filter. But stock pipes retain access to the oil filter/drain plug, so if you've still got the stockers you should be fine. Link to comment Share on other sites More sharing options...
armyofda12mnkeys Posted January 14, 2010 Share Posted January 14, 2010 You could probably get those to work. It looks like the outlet on those mufflers might constrict exhaust flow though; I'd probably stay away from them myself. And yes, oil filter/drain plug issues are affected by the placement of the pipes. The previous owner of my bike modified the pipes into a 2 into 1 system and one of the pipes runs directly across the oil filter leaving no room to remove the filter. But stock pipes retain access to the oil filter/drain plug, so if you've still got the stockers you should be fine. Wondering if drewp had any advice on putting an 'upswept' exhaust like Peashooters on an XS400 ... Would it constrict exhaust flow? Heard some give alot of power to bike (at least the Norman Hyde ones). Wit to pass inspection though, not sure how loud they are . Link to comment Share on other sites More sharing options...
Moderator drewpy Posted January 14, 2010 Moderator Share Posted January 14, 2010 Wondering if drewp had any advice on putting an 'upswept' exhaust like Peashooters on an XS400 ... Would it constrict exhaust flow? Heard some give alot of power to bike (at least the Norman Hyde ones). Wit to pass inspection though, not sure how loud they are . there was a german track race called the yamaha cup which used the xs400 for a while. the bikes weren't heavily modified except for rear sets fairings. the exhausts were not changed at all!! I have seen racing exhausts which are reverse cone megas but not pea shooters and if you wanted them upswept, you will need to change the gear change footrest and brake pedal postions, not impossible but mucha luca!! Link to comment Share on other sites More sharing options...
armyofda12mnkeys Posted January 14, 2010 Share Posted January 14, 2010 I have seen racing exhausts which are reverse cone megas but not pea shooters and if you wanted them upswept, you will need to change the gear change footrest and brake pedal postions, not impossible but mucha luca!! Darn, But I may be tempted to ask my mechanic to give it a try ... He may be able to bend some metal into a head pipe that will go around stuff so muffler can just strap on the end kinda like this I'm thinking... Peashooters look great on some cafe bikes , esp that Thruxton ... Link to comment Share on other sites More sharing options...
bznchris Posted January 15, 2010 Author Share Posted January 15, 2010 and armyofda12mnkeys, looking closer at those peashooters, I don't think you would have a problem with restriction at all. don't know what I was thinking... Link to comment Share on other sites More sharing options...
Moderator drewpy Posted January 15, 2010 Moderator Share Posted January 15, 2010 and armyofda12mnkeys, looking closer at those peashooters, I don't think you would have a problem with restriction at all. don't know what I was thinking... maybe thinking of this? Link to comment Share on other sites More sharing options...
Moderator drewpy Posted January 15, 2010 Moderator Share Posted January 15, 2010 Darn, But I may be tempted to ask my mechanic to give it a try ... He may be able to bend some metal into a head pipe that will go around stuff so muffler can just strap on the end kinda like this I'm thinking... Peashooters look great on some cafe bikes , esp that Thruxton ... i'd check the dimensions so they look right against the bike, maybe photoshop a pair on so you can see for sure if it works. its amazing what looks good on 1 bike is not right on another! Link to comment Share on other sites More sharing options...
bznchris Posted January 15, 2010 Author Share Posted January 15, 2010 maybe thinking of this? *guilty* that is quite the peashooter, by the way! Link to comment Share on other sites More sharing options...
Moderator drewpy Posted January 16, 2010 Moderator Share Posted January 16, 2010 just come accross this Link to comment Share on other sites More sharing options...
armyofda12mnkeys Posted January 16, 2010 Share Posted January 16, 2010 I like this reverse-coner as well: Curious, my mechanic has done custom headpipes/exhaust below, Not sure what you call 'em as there is no muffler 'add-on': Any advantages of an exhaust like this (or disadvantages)? Link to comment Share on other sites More sharing options...
Moderator drewpy Posted January 16, 2010 Moderator Share Posted January 16, 2010 Curious, my mechanic has done custom headpipes/exhaust below, Not sure what you call 'em as there is no muffler 'add-on': Any advantages of an exhaust like this (or disadvantages)? I recon they don't sound as good, there's no back pressure to seal the incoming charge on valve overlap so there might be some HP lost. the reverse cones are LOUD though! Link to comment Share on other sites More sharing options...
armyofda12mnkeys Posted January 16, 2010 Share Posted January 16, 2010 I recon they don't sound as good, there's no back pressure to seal the incoming charge on valve overlap so there might be some HP lost. the reverse cones are LOUD though! curious, what do the reverse cones on the end do, that makes them louder? like it seems like it either should muffle the sound coming out, or muffle it into a smaller hole where it comes whistling out since more pressure. Link to comment Share on other sites More sharing options...
Recommended Posts