63-Coupe Posted October 27, 2009 Share Posted October 27, 2009 Hi everyone. I just recently picked up an 82 XS400SJ Heritage Special. It needs a lot of bits and pieces but one of the things I am concerned with is the master cylinder. There seems to be too much travel in the handle to start with as it almost touches the grip and the resevoir sits at an almost 45 degree angle when the bike is level. I have a suspicion that this may not be the correct master cylinder for the bike. Does anyone know the correct part number, can give me any idea how to positively identify it or, better yet, can someone post or send me a picture of just what this master cylinder should look like and how it is oriented on the handlebar? Does anyone know if a master cylinder off an XS650 will fit? I have access to a 650 that is being stripped for parts. Thanks, Norm Link to comment Share on other sites More sharing options...
Moderator drewpy Posted November 1, 2009 Moderator Share Posted November 1, 2009 I think there was a specific master cylinder for this bike with extra angled mount to level the cylinder. sounds like there is air in the system for the lever to pull back like that. if the xs650 has similar bars and is single disk, then you should be ok with that. drewps Link to comment Share on other sites More sharing options...
(Graham) Posted January 16, 2010 Share Posted January 16, 2010 A good site I found to locate part numbers for our bike is Star Motorcycles. However, something very odd I found is that they do not list the 82 xs400sj as having a front disc brake. So, it is pretty confusing but by looking at the J and RJ models, I believe it is the same setup but I have yet to confirm it. They use part # 2RJ-25870-00-00, and this resembles what I have on mine. I wonder if the disc brake was an optional feature for this model. Link to comment Share on other sites More sharing options...
Recommended Posts