Moderator Goff Posted September 8, 2009 Moderator Share Posted September 8, 2009 Hi Goff Very little work done on bike today ( lazy ) been working all day . Did manage to tig up some balance pipes out of 22mm stainless will try and fit tomorrow ( if there is not a beer with my name on it ). I tried pulling out choke when on the move , but not any better , will try plug chop when exhaust back on , I dont think the fuel settings are to far out ( he says hopefully ), weather great for bikes today yet both of mine never see the sun ! Thanks Tat Cool. See you're narrowing it down slowly! I think that beer will be well deserved! Link to comment Share on other sites More sharing options...
tat42 Posted September 11, 2009 Author Share Posted September 11, 2009 Cool. See you're narrowing it down slowly! I think that beer will be well deserved! Link to comment Share on other sites More sharing options...
tat42 Posted September 11, 2009 Author Share Posted September 11, 2009 Hi Goff 1 beer turned into 2 or so ! Fitted balance pipes and bike reved up tp 9000 rpm , put exhausts on and revs dropped to 6500 , took baffles out and bike reved to 9000 , a little LOUD , I think the boys in blue might be seen regulary in my mirrors , not to sure were to go from here , maybe cut baffles down redune noise a little and maybe the revs to. Thanks Tat Link to comment Share on other sites More sharing options...
tat42 Posted September 13, 2009 Author Share Posted September 13, 2009 Hi Goff trike running better and managed to eat up a few miles , still a little misfire , on checking engine noticed small oil leak from head gasket ( nothing runs smothly when you build with old bits and peices ), ordered gasket , about 1 week until it arrives , also orderd new inlet manifold ( small rubber rings ) but still £75 for 3 , I hope this will sort it out !!!! Tat Link to comment Share on other sites More sharing options...
Recommended Posts