Jump to content

xs400 front brake leak


christoph21
This post is 5621 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

I recently bled the brakes of my 81 xs400 and it's the first time they've been bled in 20+ years ( found the bike in a barn a year ago). I didn't have a bleed kit so i roughed it a bit. I disconnected the fluid line at the caliper and drained all the black mess out. I seal it back up, added the new stuff and ran it through. I pumped it through the bleeder valve then. I sealed everything back up and the pressure seemed to have dropped a bit. Stopping felt smoother though. However, now there's a leak coming from somewhere when I press the brake hard and it doesn't look like either the bolt for the fluid line for the bleeder valve. I'm gonna try the baby powder trick tomorrow. Any thoughts? Is there a caliper rebuild kit for stuff like this (seals, etc)?

Link to comment
Share on other sites

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.

I recently bled the brakes of my 81 xs400 and it's the first time they've been bled in 20+ years ( found the bike in a barn a year ago). I didn't have a bleed kit so i roughed it a bit. I disconnected the fluid line at the caliper and drained all the black mess out. I seal it back up, added the new stuff and ran it through. I pumped it through the bleeder valve then. I sealed everything back up and the pressure seemed to have dropped a bit. Stopping felt smoother though. However, now there's a leak coming from somewhere when I press the brake hard and it doesn't look like either the bolt for the fluid line for the bleeder valve. I'm gonna try the baby powder trick tomorrow. Any thoughts? Is there a caliper rebuild kit for stuff like this (seals, etc)?

There are seal kits available and seems like the 83 XV750 is using the same seal kit too.

Here's the site:

http://www.boats.net/parts/detail/yamaha/Y...0047-00-00.html

Link to comment
Share on other sites

I came out this morning and checked to see if anything had changed and there was no pressure and the was brake fluid on the ground. It really sprayed out when I applied pressure to it. Upon introducing that new fluid, it seems that it corroded the rest of the old seals away. I'm going to buy a kit and hope that I don't need a new caliper.

Link to comment
Share on other sites

  • Moderator

seal kits are easliy available and so are the brake pistons ( i got mine done in stainless steel)

Link to comment
Share on other sites

  • Who's Online (See full list)

    • There are no registered users currently online
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...