chopped850 Posted May 19, 2009 Posted May 19, 2009 Greetings all, I just picked up a 74' RD200. It's all there but the battery cover. Seller told me topend is locked up but that's to be determined when I dig into it. It even has the original paint that's alittle faded on top of the tank. My plan is to get her back on the road and change nothing. Here are a few pic's of the old girl. This is my intro as I didn't see a topic link for an intro.
Moderator Airhead Posted May 19, 2009 Moderator Posted May 19, 2009 Hi chopped 850, Welcome to the forum, that an interesting project youve got there, rather than changing nothing however...a new chain and seat re-cover...Perhaps... ...Paul
Moderator Cynic Posted May 19, 2009 Moderator Posted May 19, 2009 I wish stuff survived like that in the uk, your wheels and pipes look fine they would be a dirty rusted mess over here.
chopped850 Posted May 19, 2009 Author Posted May 19, 2009 But the chain and seat add to the patina of the bike. Of course those will be changed out. What is the best source for parts for this bike? I'm gonna send that one guy an e-mail about some keys. Thanks for that hook up. I have two bikes in the garage right now that belong to other people that need to be put back together and then I will start this one. I was watching some you-tube vid's of the RD200 and can't wait to get this thing on the road.
JimR Posted May 20, 2009 Posted May 20, 2009 Greetings all, I just picked up a 74' RD200. It's all there but the battery cover. Seller told me topend is locked up but that's to be determined when I dig into it. It even has the original paint that's alittle faded on top of the tank. My plan is to get her back on the road and change nothing. Here are a few pic's of the old girl. This is my intro as I didn't see a topic link for an intro. Hi, UK wise that is a CS2E... our RD's had the main beam waring light in the clocks & not the h/l shell but apart from that the bike is g8 .. if the Topend is siezed you may have problems getting piston etc. But that motor did suffer from the balance weights falling out of the crankshaft (flywheels ?) and stopping the con rod moving .... so it may be the bottom end !!! Regards Jim
chopped850 Posted May 20, 2009 Author Posted May 20, 2009 I'm sure there is a pair of pistons from something that will work. The machinist that bores all my cylinders can make anything happen. Just need's the pistons that are in the bike to match them up even if they need a bigger bore. But I will have a look at the bottom end when it's time.
Recommended Posts