paddlesat16 Posted April 20, 2009 Share Posted April 20, 2009 Hi Guys anybody replaced a knackered valve guide in an SR125, any pointers would be appreciated and do I need any special tools? Regards Link to comment Share on other sites More sharing options...
steve m Posted April 20, 2009 Share Posted April 20, 2009 Best to get an engineering shop to do it, some one like these PEOPLE may be worth a ring ? The head needs to be heated up and the guide pressed out, the new one pressed in and the valve seat recut. Link to comment Share on other sites More sharing options...
Moderator drewpy Posted April 20, 2009 Moderator Share Posted April 20, 2009 should be loads of engineers in the west midlands who can do it for you, take the valve with you as well as they need it to ream out the guide. drewps Link to comment Share on other sites More sharing options...
paddlesat16 Posted April 20, 2009 Author Share Posted April 20, 2009 Thanks guys Link to comment Share on other sites More sharing options...
Recommended Posts