kelpike Posted March 9, 2009 Share Posted March 9, 2009 I just bought a 1986 FJ1200. The front brakes do not work at all. There was no fluid in the reservoir and the cap screw was stripped out. I was able get the screw out and filled the res. I thought the system just needed to be bled, however, after bleeding, they still do not work at all. I'm not even sure where to start with this issue. Any recommendations would be greatly appreciated. Link to comment Share on other sites More sharing options...
FJ12SP Posted March 9, 2009 Share Posted March 9, 2009 Front Calipers on the FJ are pretty crap, I would suggest replacing both the calipers and the master cylinder. On the 3cv & 3xw models you can use the blue spot calipers and Fazer reservoir. To be honest any modern Yam resevoir will suffice. Adam. Link to comment Share on other sites More sharing options...
kelpike Posted March 9, 2009 Author Share Posted March 9, 2009 How do I know which model I have? I'm not sure if I have the 3CV or the 3XW? Link to comment Share on other sites More sharing options...
FJ12SP Posted March 9, 2009 Share Posted March 9, 2009 Can you post a pic and I can tell you. Adam. Link to comment Share on other sites More sharing options...
kelpike Posted March 9, 2009 Author Share Posted March 9, 2009 I can't remember how to add pics to posts. But I will try to add this link to it in the gallery section. Mine is the last bike at the bottom of the page. http://www.yamahaclub.com/forums/index.php...1526&st=240 Link to comment Share on other sites More sharing options...
kelpike Posted March 9, 2009 Author Share Posted March 9, 2009 Seeing that I just bought the bike, I am trying to only replace what I have to until I can ride it a little and make sure there are no serious motor or drivetrain issues. Is there a way to test each of these so I can fix whichever is bad for now? I have already invested more than I should have considering I don't know what else might be wrong with the bike. I do plan on totally restoring if the bike ends up being worth it. Link to comment Share on other sites More sharing options...
FJ12SP Posted March 10, 2009 Share Posted March 10, 2009 Thats a Great looking FJ you have there, it's a 1tx model and I am afraid that you can't fit blue spot calipers without changing the front forks. The front brake calipers are the same as the later model rear calipers so you should be able to pick a couple of second hand units up pretty cheap, or just strip and renovate the existing calipers. The other major place to check will be the rear shock linkages these have a tendancy to seize and fail. As for the Engine it,s virtualy unbreakable there are documented cases of FJ engine's going over 200,000 miles. hope this helps. Adam. Link to comment Share on other sites More sharing options...
Recommended Posts