kelpike Posted March 3, 2009 Share Posted March 3, 2009 I had to remove the cylinder cover on my 1986 FJ1200 because three off the bolts were leaking a little oil. Is there anything I should watch for when replacing the gasket and bolt gaskets? Also, is there anything I should check or have checked while I have the cover removed? Thanks for any replies. Link to comment Share on other sites More sharing options...
Madison Motorsport Posted March 4, 2009 Share Posted March 4, 2009 If you have the top end apart, it would be well worth checking the valve clearances while they are accessible Link to comment Share on other sites More sharing options...
Recommended Posts