steve m Posted November 25, 2008 Share Posted November 25, 2008 Hiya,,, Wonder if any one knows what the float hight is for the DOHC XS400,. The bike is an Amercan import and in the inlet rubber there`s a sleel washer acting as a restrictor,it would be nice to derestrict it, but not sure what main jets or pilot jets or what the needle position wouls need to be ?? wonder if anyone has done this ?? Link to comment Share on other sites More sharing options...
Moderator drewpy Posted November 25, 2008 Moderator Share Posted November 25, 2008 Hiya,,, Wonder if any one knows what the float hight is for the DOHC XS400,. The bike is an Amercan import and in the inlet rubber there`s a sleel washer acting as a restrictor,it would be nice to derestrict it, but not sure what main jets or pilot jets or what the needle position wouls need to be ?? wonder if anyone has done this ?? try a manual http://www.files.pioneerx.co.uk/index.php?...torbike%20Files dohc xs400's were restricted in certain countries, full power ones were 45bhp try here http://66.102.9.104/translate_c?hl=en&...kLYJp8MQ7od2iCg Link to comment Share on other sites More sharing options...
steve m Posted November 25, 2008 Author Share Posted November 25, 2008 Hiya, Thanks for the reply will check out the german site,, I allready have the official Yamaha manual for the bike,but there is nothing about the restrictor or the float height setting.... Link to comment Share on other sites More sharing options...
Recommended Posts