amsterblue Posted November 8, 2008 Share Posted November 8, 2008 Does anyone know where I could get a restrictor kit for a diversion 600? I've just passed my A2 and a friend can lend me a 600 to try out but only if I get the kit! Would I be able to fit it myself or do you require the garage too? Thanks for any help. Link to comment Share on other sites More sharing options...
JimR Posted November 8, 2008 Share Posted November 8, 2008 Does anyone know where I could get a restrictor kit for a diversion 600? I've just passed my A2 and a friend can lend me a 600 to try out but only if I get the kit! Would I be able to fit it myself or do you require the garage too? Thanks for any help. depends on how legal you want to be ! you could get washers with the same o/d as the inlet manifolds (rubbers) and drill the hole out to about 12mm (not to legal but 33hp would be close if put on a dyno) cost (aprox £4.00 + fitting) or buy the real kit @ £160 + fitting. At present I have restricted a FZR600 (water cooled - early Thundercat) to 33hp using the first method and the dyno showed 32.5 hp but I must admit the bike was not rideable and you would be better off finding a 33hp bike Regards Jim Link to comment Share on other sites More sharing options...
Recommended Posts