Jump to content

SPROCKETS help


PAUL DT125X
This post is 5921 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

hi all i have a dt125x 07 can get 80mph 85 at a push but i never rely

go past 50mph so i am going to change the sprockets front or back

to get of the line farster and to pull the front up without reving the balls out of it .

just need to now what's better front or back ?

and how meny teeth to add or take off ?

and where to get them from i have had a look on the web but no luck

thanks your help will be very nice :D

Link to comment
Share on other sites

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.
  • Moderator

Paul you will need to go smaller on the front to accelrate faster, or bigger on the back, Problem with bigger on the back is your chain might not fit unless you buy a full chain and sprocket kit, which might be your best bet...How worn is your present one?

Link to comment
Share on other sites

Paul you will need to go smaller on the front to accelrate faster, or bigger on the back, Problem with bigger on the back is your chain might not fit unless you buy a full chain and sprocket kit, which might be your best bet...How worn is your present one?

its only don 4000 miels so its not that worn

Link to comment
Share on other sites

i got one from my yamaha shop £5.00

fited it today and wow

only one tooth less but what a diferens the front lifts in 1 and 2 very happy

top speed has droped by 10 mph but 0 to 60 has improved

i would reconmend tis to every one with a dt125x if your not botherd about top speed

Link to comment
Share on other sites

  • Who's Online (See full list)

    • There are no registered users currently online
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...