help please

i need to remove my swingarm bearings does any 1 no how to do this

help please

i need to remove my swingarm bearings does any 1 no how to do this

If you have a manual for any bike you can read up on doing this job as they're changed much the same way on most bikes, if in doubt buy/borrow or down load a manual for specifics on that bike.

If you have a manual for any bike you can read up on doing this job as they're changed much the same way on most bikes, if in doubt buy/borrow or down load a manual for specifics on that bike.

my manual says take to a yamaha dealer any other help,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

my manual says take to a yamaha dealer any other help,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

Removing the swingarm and renewing the bearings comes under the 4 spanner rating in a haynes manual...NOT to be done by someone with little or no knowledge.

You really need to get a Haynes specific manual for your bike, then you can see the procedure. Ive just read through the procedure for my XJ900....took me a while to make sense of it. Unfortunatly I havnt a manual for your bike, so cant even start to explain.

All I can say is, if you havnt done bearings on any bike before....this isnt the job to start with. Ive done wheel bearings and head bearings before...not the easiest of jobs.

my manual says take to a yamaha dealer any other help,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

I did mean a service manual not the owners manual. In the owners manual it tells you to take it to a yamaha dealer to change the oil.

chees for your replys it is a haynes manual im looking in ,,, wot i want to do is put thundercat swinger bearings in a r6 swinger as they the same size but the pivit bolt on the thundercat is smaller ,,,,,,,,,,, or does any 1 no where i can get the swinger made to fit,,,,,,,,,,,,,,,,,,,