Hi i just purchased a YZF 750 R 1995.

1st up let me say what a great site ...as I am new to biking I would like to ask your opinion on certain things.

1.Is there a replacement tail light I could use to change the standard one as an l.e.d?

2.How easy is it to change the rear section to the R6 tail section?

3.Sometimes when I pull away, then go into second sometimes the engine dies and then starts with no problems and is ok?

4.Where can i get the decals if need be for this bike if anything happens to them?

5.What other mirrors could I use for this bike as i think the standard ones are a bit in the big side?

Thanks in advance to anyone who will answer my questions.

hi there

i used to have a yzf very nice bikes mine had a dyno jet and a end can and would keep with a r1 ,,,,, your prob of bogging down could b the carbs have them set up and balanced should help,,, i would go for a r1 single seat unit then u wouldnt have to make a pillion seat fit ,,, i have put 1 on my fzr600 was quite easy then u could fit a r1 under tray i made mine,, u might have to cut some of the sub frame away to get it to fit but shouldnt b that hard,,,, if u send us your e mail i can send u some pics of yzf750s that have full r1 body work and i no of a site that goes through how to fit the seat unit to a fzr so would b more or less the same for the yzf,,,, hope some of this helps.

mick

hi there

i used to have a yzf very nice bikes mine had a dyno jet and a end can and would keep with a r1 ,,,,, your prob of bogging down could b the carbs have them set up and balanced should help,,, i would go for a r1 single seat unit then u wouldnt have to make a pillion seat fit ,,, i have put 1 on my fzr600 was quite easy then u could fit a r1 under tray i made mine,, u might have to cut some of the sub frame away to get it to fit but shouldnt b that hard,,,, if u send us your e mail i can send u some pics of yzf750s that have full r1 body work and i no of a site that goes through how to fit the seat unit to a fzr so would b more or less the same for the yzf,,,, hope some of this helps.

mick

if u google heaths fzr u will sort of see how to do it ......