Jump to content
frainey

04 Yamaha Aerox

Recommended Posts

Hello, im new to the forum.

i used to own a baotian 50cc 4 stroke ped but i got tired of it being so slow.

So i sold it for £400 and put £100 towards it and bought one off autotrader.

Now, there is only a small prob with it as it has manual choke.

When i do not press the choke while riding the bike crawls to 30, but if i press it in say halfway the bike will shoot off and do a nice 55MPH.

If i press the choke in on idle it will cut the bike out so im a little confused.

How can i fix it so the bike will do a nice 55MPH without the need to choke it.

Thanks. ;)

Share this post


Link to post
Share on other sites

I am no expert on 2 stokes unfortunately,

however it sounds like its due to the fueling as ive heard of similar probs being linking with the carb, it might be worth looking at the carb set up see if its running lean as if it was that might explain the lack of power. Also check all the usuals like air filter and fuel lines.

Any body with a better 2 stroke knowledge about?!?!?

:blink::blink::blink:

Share this post


Link to post
Share on other sites

With my aerox i only need the choke to start it and after 15 seconds i turn it off and if i put it on again mine cuts out

is the engine revving going up to 30 or does the engine sound slow ?

might be your rollers if not

check your carb make sure its clean you shouldnt have many problems with a 3 year old bike mines a 2001 and the performance is the same as when it left the showroom

Share this post


Link to post
Share on other sites

Orite bois i am new to this forum and i am woundering what exhaust you would recommend i have a yamaha aerox 2007, i was thinking about getting either a leo vinci zx or a giannelli reverse !. What one would you go for out of the two or do u recommend any other exhausts ? i need help despritly lol

thanks warren

Share this post


Link to post
Share on other sites

change the variator rollers

try a nice set of 7-6 grammers

this will help your acceleration

then try a k&n style filter if you want to go further

fav fun :)

Share this post


Link to post
Share on other sites

Orite bois i am new to this forum and i am woundering what exhaust you would recommend i have a yamaha aerox 2007, i was thinking about getting either a leo vinci zx or a giannelli reverse !. What one would you go for out of the two or do u recommend any other exhausts ? i need help despritly lol

thanks warren

DON'T TOUCH TECHNIGAS!

slap a leo vinci TT on

good pipe :)

Share this post


Link to post
Share on other sites

DON'T TOUCH TECHNIGAS!

slap a leo vinci TT on

good pipe :)

On another forum i have been told to go for a yasuni ! do you now any thing about them ?

Is the leo vinci TT better than the zx ? :unsure:

Share this post


Link to post
Share on other sites

On another forum i have been told to go for a yasuni ! do you now any thing about them ?

Is the leo vinci TT better than the zx ? :unsure:

no, zx i a tad bit better but they tend to be more on the expensice side

but if u get a zx for £100 or less grab it...bargain :D

yasuni are pipes used more with big bores...or so i have been told

Share this post


Link to post
Share on other sites

no, zx i a tad bit better but they tend to be more on the expensice side

but if u get a zx for £100 or less grab it...bargain :D

yasuni are pipes used more with big bores...or so i have been told

I have got a polini racing team exhaust and they are the dogs @*[email protected]#*!

They are a bit expensive but really worth the money.

Share this post


Link to post
Share on other sites

running lean, when you press the choke in half way it richens the mixture enough to get the engine running at its optimum, but when it is idling and you push it in half way when its warm it floods the engine and stalls it.

have you put a new exhaust, air filter or any performance mods on it? i reccomend changing your fuel jets up a size and trying it then :)

Share this post


Link to post
Share on other sites

i reccomend changing your fuel jets up a size and trying it then

or at least make sure they're clean...

Have you tried using redex?

Share this post


Link to post
Share on other sites

my yamaha aerox 56 reg wont start its been in the garage and stopped starting on the electric start earlier in december but carried on working with a easy kick but now its completed stopped working i havent been able to start it and ive now brought it inside my house because of the cold weather to see if it gets better but it hasnt can anyone help? im a real beginner with bikes i can just about manage to put petrol in and top the oil up thats all i can do.

Share this post


Link to post
Share on other sites

tbh leave your mopeds standard, they aint gona get past 50mph

Share this post


Link to post
Share on other sites

probably needs a new spark plug - with 2 strokes these have to be changed very regularly.

this is very likely if itll start on the kick but not by lectrickery.

Share this post


Link to post
Share on other sites

hi guys i have a yamaha aerox 50cc 2005 plate i have just bought a vice TT exhaust and i stuggled to fit it last night their was screws missing i got it brand new of adrenalin web site and when i have road it today the bottom of the exhaust has all gone black like its burnt i was just wondering have i fitted it wrong or is that right not sure please help thanks

ash g :)

Share this post


Link to post
Share on other sites

hello i am new to this forum but does any one no the best rollers to put in a 50cc aerox with a gianelli reverse exhaust on it i have 4.5 in at the moment and its been upjetted twice and a malossi variator and clutch help please :unsure:

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...