Jump to content

97 Yamaha thundercat 600 rear axle problem


Recommended Posts

Got this bike in poor condition. While doing the rear brakes and rotors I noticed the wheel alignment was out of wack so I got a manual and it appears I was missing a spacer on the axle. I went on ebay and have received my 3rd. axle . All three are a smaller diameter axle? They were all from various years including 97. Any ideas what the hell is going on? Help !

Link to post
Share on other sites

If it's anything like a Thunderace, there should only be one option...
I'll look into it when I get home tonight and let you know.

Link to post
Share on other sites
  • Moderator

Don't know the thunder cat per se, but there could be up to 3 spacers.

1 twixt left sprocket carrier and swing arm

1 fits inside the left bearing between sprocket carrier and left hub bearing, looks like a top hat and most peeps throw these away when renewing the bearing as it is drifted into it.

1 in-between the hub bearings

maybe 1 right side which usually is the calliper mount

Link to post
Share on other sites

Ok, so their appears to be only ONE option (same as the Thunderace).

 

Original Part Number: 3GM2538119

Replacement Part Number: 3GM-25381-A0

 

There are 3 spacers (technically 4 (the rear brake calliper bracket is the 4th one)).
Check out the pic I'm attaching, which spacer are you missing? And importantly, are the ones you DO have in the right order?

89a5a802dd01127a2d5a4975f1a0460a.png

Link to post
Share on other sites
  • 2 weeks later...

I have a similar issue, item 12 is missing in my case. I have bought two spare complete rear wheels (including sprocket carriers) and this collar is missing on both. My question is - is it needed or is it safe to carry on without it?

cheapest replacement I can find is £46 which seems steep for what it is.

if anyone has one kicking around cheap I’d be interested.....

Link to post
Share on other sites
  • 1 month later...
  • Moderator
On 3/2/2021 at 9:46 PM, Flyboy80 said:

I have a similar issue, item 12 is missing in my case. I have bought two spare complete rear wheels (including sprocket carriers) and this collar is missing on both. My question is - is it needed or is it safe to carry on without it?

cheapest replacement I can find is £46 which seems steep for what it is.

if anyone has one kicking around cheap I’d be interested.....

What?, no you cannot do without it. it takes the tightening torque of the spindle, without it you put a massive load directly onto the bearings and the wheel will never tighten properly. Dangerous, nigh on suicidal.

Its in a lot more than the thunderace, the yzf 750, fzr600 xjr1300, its a good list. 35 quid new from fowlers.

  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online (See full list)

    There are no registered users currently online

  • Recently Browsing

    No registered users viewing this page.

×
×
  • Create New...