Jump to content

XT250 work in progress


Clive.n
This post is 1286 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

https://www.flickr.com/photos/34857616@N05/50341589103/in/album-72157715970255403/https://www.flickr.com/photos/34857616@N05/50342438447/in/album-72157715970255403/https://www.flickr.com/photos/34857616@N05/50342437902/in/album-72157715970255403/https://www.flickr.com/photos/34857616@N05/50342271796/in/album-72157715970255403/https://www.flickr.com/photos/34857616@N05/50342271286/in/album-72157715970255403/https://www.flickr.com/photos/34857616@N05/50342272361/in/album-72157715970255403/

not sure its worked ?

Evening all, 

Put some photos on the middle bike runs and is on a nova so will need an MOT to get a V5, I have rebuild the top end on this engine and driven it around a field (no brakes it was a big field)

the green bike has a V5  year of manufacture 1980 looks like it was imported in 1995

The third bike is a rolling chassis i will need to apply for nova for this one

the engine on the bench runs and was in the middle bike while the engine was being rebuilt 

I am now bogged down on the wiring none of the wiring diagrams seem to match the loom that i have on the table all of the bikes had been striped back to most basic wiring for off road use only  at this point i am creating a loom diagram and will make my own looms (someone must have done this in the past)

there are also two different rear ends the green one is the odd one out any ideas

Link to comment
Share on other sites

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.
×
×
  • Create New...