Jump to content

400 xs. Replace regulator and rectifier with one unit


scott froid
This post is 1702 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

1980 400 XS.  I have a seperate five wire regulator and three wire rectifier.  If I want to replace both with one unit do I just wire the old rectifier (three white, one black, one red), to new combo unit and then old regulator, ( black, green and brown), to the new unit?

So I am just rewiring two units into one.  Thanks for reading.

There are  only two wires for the regulator on the new combo unit, the old one has three.  Do I ground the green and splice the bnlack and brown?

 

 

Edited by scott froid
update information
Link to comment
Share on other sites

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.
  • Moderator

You sure you have the right one?

there were 2 types of xs400 the Dohc had a different charging system than the sohc 

  • Thanks 1
Link to comment
Share on other sites

×
×
  • Create New...